Complete 03 Cobra coupe part out

[Pritch]

I will be parting out a complete, undamaged 63k mile 2003 Cobra coupe Oxford White with parchment interior. Only mods were a JLT high boost intake, muffler delete and SCT tune. Interior is in good shape, seats are in OK shape both fronts have entry wear and the seat inserts have wear and a couple blems from a smoker. Exterior is clean, the front bumper cover is new ( aftermarket CAPA certified part ) with new OE Ford foglight bezels, bumper cover/hood and drivers fender were just repainted and the rest of the car polished. Only blems are the drivers front skirt piece has a small chunk missing and there is a crack in the rear wing itself with a crack in the third brake light lens as well.

Due to circumstances beyond my control I cannot and will not sell the car complete so DON'T ASK.

PM or post with needs.


Edit: PULLING PARTS AS OF 4/4/15!!!!

SOLD ITEMS:

* Complete trans swap
* All wiring including cluster and ECU
* rear bumper, side skirts, rear decklid with spoiler/brake light
* Airbags
* Steering rack
* Front bumper complete assembly
* mirrors
* taillights
* shifter bezel w/boot
* e-brake assembly and leather boot
* complete A/C system
* seats
* center console
* headlights
* complete IRS
* dash
* fuel tank with hat and pumps
* long block

 

[BadBlue98GT]

Driver's side door cup/bezel, e-brake boot, front bumper hardware, and third brake light.

 

[jblood37]

No aftermarket gauges correct?

 

[Tpeezy24]

I call dibs on MAF sensor on the intake

 

[2blugts]

Interested in spoiler and rear bumper cover

 

[Franco]

Chin spoiler and mirrors

 

[Joe5.0]

Sent you a PM.

 

[Cobrame]

Interested

Dibs on:

Passenger Side Kick Panel (ECU Panel)
Supercharger (stock right?)
Lower Pulley Setup to include support and pulley
Stock Radiator (if in good condition)


Please PM me details
Interested Buyer!!

 

[Pritch]

Driver's side door cup/bezel, e-brake boot, and third brake light.

e-brake boot is already spoken for, the rest of the stuff will be available.

 

[Pritch]

No aftermarket gauges correct?

No sir, all stock gauges.

 

[Pritch]

I call dibs on MAF sensor on the intake

It has an SCT MAF on it, I believe its a BA3000 i'll have to confirm. Not sure yet if I want to separate that from the JLT.

 

[Pritch]

Interested in spoiler and rear bumper cover

You are close enough that we could meet, shoot me a PM.

 

[Pritch]

Chin spoiler and mirrors

As of now the chin spoiler is going to stay with the front bumper cover, it is OE Ford. Mirrors are already spoken for, sorry.

 

[Pritch]

Dibs on:

Passenger Side Kick Panel (ECU Panel)
Supercharger (stock right?)
Lower Pulley Setup to include support and pulley
Stock Radiator (if in good condition)


Please PM me details
Interested Buyer!!

I am going to sell the motor and related Eaton stuff complete. Can runs and drives fine the radiator is in good shape and the kick panel piece would be available as well.

 

[Joe5.0]

Dibs on the following

Front Bumper cover
Both fenders
Hood
Core support
Headlights
Fog lights
Heat exchanger brackets
Rear bumper if still available (my car is Oxford White)

Joe

 

[Pritch]

Sent you a PM.

Replied, thanks!

 

[Franco]

Thanks

 

[HuntFishCobra]

Driver's side vent right up by the gauge cluster (the little triangular one actually on the dash)? Mine is cracked. PM with price and pics? Thank you sir!

 

[HuntFishCobra]

Also, the ABS sensor retaining nuts that keep the sensor bracket attached to the front struts. Another free bump lol. Thanks!

 

[Weslsew]

It has an SCT MAF on it, I believe its a BA3000 i'll have to confirm. Not sure yet if I want to separate that from the JLT.

Might be interested in JLT and MAF together if the price is right.

Also, splitting the tail lights? Interested in the drivers side if it's clean