Complete 03/04 IRS Assembly

[slow_mach]

Selling my extra IRS setup.

- 25k miles
- Complete pull out (shocks, abs sensors, brake pads/rotors/calipers/brackets)

Does have some aftermarket parts:

- H&R Race Springs (no, I will not sell separately)
- Low Profile subframe bolts (BNIB never installed
- SS Front/Rear subframe bracket bolts (BNIB never installed)
- LFP Diff Cover (BNIB never installed)

$1200 FIRM for it all. PLUS Shipping and PayPal fees. Local pick up is very welcome. I will drive upwards of 3 hours for my asking price. deposit is needed before I drive anywhere. Not going to drive 3 hours away and you not show up.

 

[slow_mach]

up

 

[slow_mach]

Ttt

 

[Gringo185]

I've been considering an IRS setup for my '97 but haven't done much research ye. Do you know if this will bolt up directly in place of the SRA (other than exhaust of course)?

 

[slow_mach]

I've been considering an IRS setup for my '97 but haven't done much research ye. Do you know if this will bolt up directly in place of the SRA (other than exhaust of course)?

Yes, aside from driveshaft. Not sure what needs to happen there for you.

 

[slow_mach]

Up.

 

[nitroram33]

Yes, aside from driveshaft. Not sure what needs to happen there for you.

Assuming the '96-'98s use a 1330 u joint like the '94-'95s like I'm more familiar with (and they should since the rear end is the same), he should just need a 1330/1350 combo u joint and a '03-'04 Cobra flange yoke:

http://www.summitracing.com/parts/mog-448
http://www.dennysdriveshaft.com/p52...350_series_flange_yoke_fits_8.8_inch_rea.html

If you'd posted this a couple months from now it would already have a new home, but I've got a bunch of MM stuff to buy first. GLWS!

 

[slow_mach]

Assuming the '96-'98s use a 1330 u joint like the '94-'95s like I'm more familiar with (and they should since the rear end is the same), he should just need a 1330/1350 combo u joint and a '03-'04 Cobra flange yoke:

http://www.summitracing.com/parts/mog-448
http://www.dennysdriveshaft.com/p52...350_series_flange_yoke_fits_8.8_inch_rea.html

If you'd posted this a couple months from now it would already have a new home, but I've got a bunch of MM stuff to buy first. GLWS!

Thanks for chiming in with that info. I usually get these from "customers" who want to do a solid axle so I usually have one or two a month for sale. Shoot me a PM when you're ready for one and maybe I'll have one - or just keep looking for the posts, lol.

Bump

 

[nitroram33]

Thanks for chiming in with that info. I usually get these from "customers" who want to do a solid axle so I usually have one or two a month for sale. Shoot me a PM when you're ready for one and maybe I'll have one - or just keep looking for the posts, lol.

Bump

No problem. I actually may have found one for a reasonable price already that I'm going to go ahead and grab if it checks out. Going to look at it on Tuesday, will keep you in mind though if that falls through.

Another FYI, the Ford PN for a Terminator Flange Yoke is F65Z-4782-AA which now supersedes to DL3Z-4782-A. The latter PN is also used in newer Mustangs and F-150s and is about $40 shipped on eBay most of the time.

 

[slow_mach]

Bump!

 

[sho amo]

So where do you get the SRA's from? If you were closer I'd be interested in doing a trade for my 94 cobra SRA.

 

[specializedbndt]

interested. text pics to 603-973-1901

 

[specializedbndt]

well??

 

[slow_mach]

This one is long gone. I've got two more here, posting in separate. Please lock thread.