Can you take front cover off Paxton 2200 while on the car?

fulanititoo8198

Member
Established Member
Joined
Nov 17, 2004
Messages
955
Location
Florida
Would like to polish or powder my cover on the Paxton Novi 2200 it looks like a few small bolts behind the housing and it should come off pretty easy. Has anyone done this? Looks like it can be done without taking anything else off except the bottom intercooler pipe.

Thanks!


Borrowed this pic from JPC
 
Last edited:

fulanititoo8198

Member
Established Member
Joined
Nov 17, 2004
Messages
955
Location
Florida
Spoke with a vendor states it can be done by removing the 6 bolts on the back and to be careful as they threads are aluminum no seal or anything behind to worry about. Just passing along the info... Still looking for anyone that has done it though I don't want to break a perfectly good unit :-D
 

SignalZero

Eat mor Chikin
Established Member
Joined
Oct 18, 2012
Messages
1,886
Location
Florida
Dunno if you can get to them on the newer coyote cars but on my old 2V, I did the same thing. Removed intake and charge pipes, 6 bolts and it slid right off. Nothing behind it but the wheel and main body portion. Putting it back on was just as simple.
 

redfire04gt

Blown 2v
Established Member
Joined
Dec 19, 2009
Messages
1,010
Location
St. Louis
I removed mine from my d1sc but it was off the car. Looks similar and as the vendor and signalzero stated it should come right off.
 

Users who are viewing this thread



Top