Bullet Cams, Manley Valve Springs, JLT Intake, 4V Cobra / Mach 1 Performance Parts

BimmerGuy

Member
Established Member
Joined
Nov 3, 2014
Messages
39
Location
Florida
ALL PRICES SHIPPED but do not include PP fees

BBK 98 cobra Throttle body drilled for 99-01 Cobra manifold IAC $140

Walboro Ford Focus SVT Fuel Pump kit for Mustangs ($90)

2001 Mustang Cobra oil filter adapter with oil cooler housing and anchor tube- looks clean but like anything that holds fluid I'd replace the seals. ($100)

2001 Mustang Cobra thermostat housing with hoses ($50)

2003 Cobra starter was told it had 45K miles $45

MAF with big filter mount (was told it was a Mach 1 unit but the p/n fits a GT so...) $55

JLT Cold Air Intake for 99-01 Cobra/03-04 Mach 1 with MAF and filter SOLD

Ford Racing FRPP Red Top 30lb. fuel injectors SOLD

RAM billet flywheel (seller said it had never been used and looks new) SOLD

RAM clutch with helix hub (new from AM) SOLD

BBK Long Tube headers SOLD

2005 Lincoln Aviator 4.6 DOHC engine (FRPP/DC cylinder heads!) 77K miles SOLD

2001 mustang cobra intake manifold and throttle body SOLD

2001 mustang cobra throttle and cruise cables with bracket SOLD

2001 mustang cobra coolant crossover SOLD

90MM MAF housing SOLD

2001 mustang cobra "roush take-off" alternator (seller said it had never been used. It does look new.) SOLD

Set of 4V Custom Ground Bullet Racing N/A Camshafts - 268/270-130H. The right two are new. Manley Valve Springs included. SOLD

20150727_215124_zpsu6ngvvkv.jpg

20150727_215042_zps0bbhtohs.jpg

20150727_214954_zpsxd5fsm43.jpg

20150727_214825_zpsf6ypfmiz.jpg

20150727_214735_zpsfrhd22e3.jpg

20150727_214640_zpswgus9qvn.jpg

20150727_214612_zpszcbh0s8c.jpg


20150727_214312_zps3tfvq8ko.jpg

20150727_214217_zpssx6zjfbh.jpg

20150727_214157_zps0fzxvyjf.jpg

20150727_220238_zpsve2zi06c.jpg

20150727_220222_zpssyyxlem6.jpg

20150727_220137_zpsinpffk39.jpg

20150727_220018_zpsfm222k0f.jpg

20150727_215830_zpsqo0its5r.jpg

20150727_215736_zps6jsjuuzi.jpg

20150727_215643_zpstquuddg1.jpg
 
Last edited:

BimmerGuy

Member
Established Member
Joined
Nov 3, 2014
Messages
39
Location
Florida
They are designed for stock ones. They came out of a forum member's road race car and handled 7K+ without issue with properly intalled stock retainers and locks. I'm really trying to sell as a set. Whoever gets the gnarly cams will need the springs. If I separated but I'd want $200 shipped.
 

theboss281

Member
Established Member
Joined
Sep 12, 2012
Messages
297
Location
Doral - Florida
Custom Ground Bullet Racing N/A Camshafts - 268/270-130H. The right two are new. Manley Valve Springs. Seeings as the cams are $1300 new and the springs are $500 new, I'd like to sell the Bullet Cams and Manley Valve Springs as a set for $1000.

Still available ?
 

Users who are viewing this thread



Top