I was visiting Corbotech's website earlier and they had an "Important Note" at the bottom of the product description (see below).
I'm just wondering if there are any magnesium components in our brake or clutch system. I already have the LCF600 fluid and would hate to do the swap just to create an issue and potentially one with the clutch. I wasn't sure if the clutch slave cylinder made of magnesium. I know Van runs the fluid in his personal car so I doubt there are any issues but would just like to verify first. I haven't seen the warning on his site or any others for that matter.
Here's the Important Note:
DO NOT USE Brembo LCF 600+ fluid in contact with any type of magnesium components (e.g. gearbox / clutch components) as a chemical reaction is caused resulting in gases being generated. This will then prevent the clutch hydraulics from working efficiently.
I'm just wondering if there are any magnesium components in our brake or clutch system. I already have the LCF600 fluid and would hate to do the swap just to create an issue and potentially one with the clutch. I wasn't sure if the clutch slave cylinder made of magnesium. I know Van runs the fluid in his personal car so I doubt there are any issues but would just like to verify first. I haven't seen the warning on his site or any others for that matter.
Here's the Important Note:
DO NOT USE Brembo LCF 600+ fluid in contact with any type of magnesium components (e.g. gearbox / clutch components) as a chemical reaction is caused resulting in gases being generated. This will then prevent the clutch hydraulics from working efficiently.
