Brembo 4 piston Calipers

[Rosco]

I have a set of Brembo front and rear 4 piston calipers. The fronts are the same calipers as the brembo brake package calipers. These came off of a Model S due to color fading at around 35k and are in perfect working condition. A good paint job will make these badass. Pads are around 7mm and have shim kit installed. Looking for $450 for the whole setup.

 

[ZackS21]

interesting. What else would it take to swap these onto a 2012 w/o factory brembos?

 

[Rosco]

That's what I'm not entirely sure about. The calipers are the same as what Ford used in the Brembo package. On the model s they bolt up straight through the spindle into the caliper. I imagine Ford did the same thing since these are generic 4 piston calipers, and do not need a lower bracket for install. I have not seen anyone selling these calipers on the forums have mounting brackets with them. You can call ford and ask if a mounting bracket is used or if you know anyone that can pop their wheel off and see if their brembo brakes use a bracket.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Rosco]

If anyone has the brembo brakes package can chime in and let us know if they have a mounting bracket would be greatly appreciated.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[GT500-2007]

It does not have a separate mounting bracket. They attach to the spindles. Simple swap. Take off the stock calipers and just install the Brembos with a set of 14" rotors. Bleed and you are good to go.

GT

 

[Rosco]

Thank you GT500 for chiming in on this discussion. Looks to be a very straight forward swap. I do have 15" rotors but they are 5 x 120, so only some rotors should be needed to complete swap.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[Rosco]

Ttt

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[agent naranja]

I'm interested

 

[Rosco]

I'm interested

I still have them available.

 

[Rosco]

Price drop $350. I have 2 sets available.

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[illkev724]

Is the Tesla lettering engraved?

 

[Rosco]

No, it was just painted.

Sent from my SAMSUNG-SM-N910A using Tapatalk