Blow-thru MAF on non-intercooled Vortech?

UncleSAm

Blow Me
Established Member
Joined
Feb 21, 2011
Messages
3,882
Location
S0-CAL
Yeah would have to use a slotted Maf and change it to vent to the atmosphere

I have a bov/bypass valve that's new if you need one
 

cbrown9064

Member
Established Member
Joined
Feb 25, 2014
Messages
609
Location
Mandan, ND
Can't do it. Well...can't do it without a lot of unnecessary piping. Think about it.

You have to be able to have a blow off or bypass valve to prevent compressor surge. You cannot vent air to the atmosphere if it has been metered. There isn't enough pipe length in a standard non-intercooled setup to put a MAF in a straight section of pipe. This is why non-intercooled are draw through.

You can use a slot MAF in a draw through.
 

viperbluelx

Sexton's Performance
Established Member
Joined
Sep 5, 2002
Messages
3,402
Location
Ringgold, GA
Yeah it's gone, I have a Viper now but I don't want to beat on it at the track so I picked up a 98 Cobra today
 

98 N/A 4V

Active Member
Established Member
Joined
Sep 14, 2004
Messages
2,494
Location
Tampa, FL
Ok well I can't argue with that. Vipers are bad ass. Nice ride. Glad your back in a mustang though. Haven't seen you around the boards in a while.

-Mark
 

ysicobra

New Member
Established Member
Joined
Sep 1, 2011
Messages
12
Location
Central Illinois

Attachments

  • 101_2698_zpsnt3vitcp.jpg
    101_2698_zpsnt3vitcp.jpg
    280.1 KB · Views: 193
  • 101_2696_zps1x46lozz.jpg
    101_2696_zps1x46lozz.jpg
    251.5 KB · Views: 169

Users who are viewing this thread



Top