Behind bars Race Cars fuel system..

[dadro77]

Well, after a lot of research, I am going to go for the Behind Bars Race Cars fuel system. Chris at BBRC makes some bad ass stuff!! This is a bullet list of what is included. As you can see, it is truly everything minus injectors. Tkae your old stuff out, and put the new stuff in!!


ALL FITTINGS ARE BLACK 2000 SERIES FRAGOLA RACE ENDS

Fuel rail fittings
2 #8 UNIONS
2 #8 RADIUS FITTINGS
4 #8 ORINGS
4 #8 90 DEGREE FITTINGS

FUEL PRESSURE REGULATOR FITTINGS
1 #6 TO #8 REDUCER
2 #10 TO #8 REDUCER
1 #6 ORING
2 #10 ORINGS
3 #8 90 DEGREE FITTINGS

Y BLOCK FITTINGS
2 #8 UNIONS
1 #10 UNION
2 #8 ORINGS
1 #10 ORINGS
2 #8 45 DEGREE FITTINGS
1 #10 STRAIGHT FITTING


TANK FITTINGS
1 #8 UNION
1 #10 UNION
1 #8 90 DEGREE FITTING
1 #10 90 DEGREE FITTING
1 #8 ORING
1 #10 ORING


VENT
1 1/2 NPT TO #6
1 #6 90 DEGREE FITTING
2 FEET #6


15 FEET OF PREMIUM BLACK NYLON RACE HOSE #10
25 FEET OF PREMIUM BLACK RACE HOSE #8

FUELAB OR MAGNAFUEL ADJUSTABLE BOOST REFERENCE FUEL PRESSURE REGULATOR

BILLET Y BLOCK #10 IN 2 #8 OUT

BILLET FUEL RAILS

MAGNAFUEL FUEL PUMP RELAY

12 FEET #10 GAUGE WIRE

10 #10 CUSHION CLAMPS

10 #8 CUSHION CLAMPS

SUMP TANK SET UP INCLUDES
7,14,OR 18 GALLON ALUMINUM FUEL TANK
3 FEET OF #12 LINE
#12 UNION FITTING
#12 90 DEGREE FITTING
#12 STRAIGHT FITTING
#10 STRAIGHT FITTING
74 MICRON STAINLESS PRE FILTER
25 MICRON STAINLESS POST FILTER
BILLET PUMP MOUNTS
CHOICE OF FUEL PUMP

IN TANK SET UP
18 GALLON FUEL TANK/#8 DRAIN
CHOICE OF PUMP
74 MICRON STAINLESS PRE FILTER BUILT IN TO TANK
25 MICRON STAINLESS POS FILTER BUILT IN TO TANK
3 #10 UNIONS
1 #10 STRAIGHT
1 #10 180 DEGREE FITTING
3 #10 90 DEGREE FITTINGS
3 FEET OF #10 LINE



Some pics of his stuff.....

If you guys call Chris, tell him Dale sent you and he can hook you up for sure!!

 

[Stroked03Cobra]

... I love their stuff. Im saving for that setup for the spring project!

 

[94_5.slow]

If you don't mind, how much did that set you back? What hp is that system good for? Something crazy I'm sure!

 

[Stroked03Cobra]

If you don't mind, how much did that set you back? What hp is that system good for? Something crazy I'm sure!

They have i believe 3 different stages to choose from. The first stage start at around $1,899 and is good for a ton of power and is not a bad price for everything you get.

 

[94_5.slow]

That is actually a good price like you said for everything you get. If I remember correctly aeromotive was about $1200 or so. Congrats on your purchase and have fun with the install! Keep the pics coming with your progress.

 

[dadro77]

... I love their stuff. Im saving for that setup for the spring project!

Ya man, Chris makes the sickest set ups. The welds are perfect.

If you don't mind, how much did that set you back? What hp is that system good for? Something crazy I'm sure!

They have i believe 3 different stages to choose from. The first stage start at around $1,899 and is good for a ton of power and is not a bad price for everything you get.

That is actually a good price like you said for everything you get. If I remember correctly aeromotive was about $1200 or so. Congrats on your purchase and have fun with the install! Keep the pics coming with your progress.

Yes, there are a lot of options. You have to look at what is included with the BBRC kits. I haven't ordered yet as I am still saving, but that is what I'm getting. The last picture is of the internal pump 18 gallon tank. They tested it on a 1,000 hp Termi. Installed the tank, put in 2 gallons of gas in it, and the owner just ripped the car apart! Full throttle forward into a 360, full stop, etc. The car NEVER starved for fuel!! I just did not want to worry about driving hard with a 1/2 tank of gas especially now that I'm going E-85. Don't forget to tell Chris that you heard about BBRC from Dale if you guys call. He will hook you up with a great price.....