• Welcome to SVTPerformance!

baseline passes in stock auto

Discussion in '2011-2014 Mustang Talk' started by turbosha, Mar 8, 2014.

  1. turbosha

    turbosha stirring the pot since'74 Established Member

    Messages:
    1,460
    Joined:
    Jan 6, 2013
    Location:
    columbia tn
    so I took my stock hp 13 auto to the local track today.
    stock p zeros, stock exhaust (steeda ab's), no tune, stock airbox etc...

    the only things I did before going is: remove rear seat, remove spare and jack, and remove front sway bar. half tanks of gas.

    first run was my best. did not power brake. left at idle and flashed converter. ran [email protected]. (1/8th mile track)
    tried power braking and spun several times. ran a series of 8.30's-8.40's pretty consistant.

    this is a good base line test, so now I know what my additions will gain.

    my question is: does this seem right? it equals to about 12.8-12.9 quarter mile.:??:
     
  2. vortecd

    vortecd Well-Known Member Established Member

    Messages:
    1,504
    Joined:
    Aug 16, 2012
    Location:
    MI
    Yup. 1st time at the track mine went 8.4 1/8th and 12.9 1/4. With mufflers and perfect conditions I ran 8.18/[email protected]
     
  3. SL0W5.0

    SL0W5.0 Member Established Member

    Messages:
    121
    Joined:
    Nov 23, 2013
    Location:
    tampa fl
    thats a just a tad faster than my stock baseline run which makes sense since you have an a6
     
  4. Tgpatrsn

    Tgpatrsn Member Established Member

    Messages:
    94
    Joined:
    Jan 2, 2014
    Location:
    SF Bay Area
    I went 8.21 in the 1/8 and 12.63 in the 1/4 baselining mine. Car was completely stock with nothing taken out of the car.
     
  5. nordy racer

    nordy racer Active Member Established Member

    Messages:
    1,190
    Joined:
    Jan 24, 2006
    Location:
    MD
  6. 5.0jake

    5.0jake Member Established Member

    Messages:
    748
    Joined:
    Aug 4, 2010
    Location:
    USA
    In my case I ran a 12.9 @113 with a 8.6 1/8th and 2.2 60ft.:nonono:
    Your 1/4 may be a tad quicker.


    According to that conversion table I should have run a 13.4, guess I picked up a fair amount on the back half.
     
    Last edited: Mar 9, 2014
  7. calebnumber3

    calebnumber3 Member Established Member

    Messages:
    440
    Joined:
    Nov 19, 2008
    Location:
    Missouri
    Not bad. I ran a best of 8.15 for my base line full weight and stock down to the tires lol
     
  8. Laztug

    Laztug Member Established Member

    Messages:
    353
    Joined:
    Nov 5, 2011
    Location:
    Slow Lane
    20140112_015223_zps9adf014f.jpg

    dont mind the 1/4 mph.
    i missed 4th....dont judge me.
     
  9. turbosha

    turbosha stirring the pot since'74 Established Member

    Messages:
    1,460
    Joined:
    Jan 6, 2013
    Location:
    columbia tn
    I couldn't cut a 60' on the stock tires.
    2.09 was my best. to much throttle on the launch just spun.
     
  10. calebnumber3

    calebnumber3 Member Established Member

    Messages:
    440
    Joined:
    Nov 19, 2008
    Location:
    Missouri
    Yeah the 60 hurt you. I cut my best 60s by bringing it up to about 1K RPM and then flash the converter on the 3rd light. Cut 1.9 60s all night. If I left from idle I just spun.
     

Share This Page