I decided to clean up my center console. My old setup had a B&M pro stick bolted directly to the tunnel and the center console/shifter bezel was considerably hacked up. I decided to purchase a new shifter (black) and a bolt in pedestal from Tig Vision in black. I also purchased a good used cobra center console from eBay and a new shifter bezel from LMR. I'm very happy with the results. The only thing I need to do now is update the touchscreen/bezel.
Side note -- there are 2 plugs/grommets that I designed in CAD and 3d printed. One aligns the shifter cable and the other goes in the cigarette lighter hole. The one in the cigarette lighter hole is repurposed so my MS3-PRO serial cable can bolt in place and I can just plug the Bluetooth adapter into the dash.
Side note -- there are 2 plugs/grommets that I designed in CAD and 3d printed. One aligns the shifter cable and the other goes in the cigarette lighter hole. The one in the cigarette lighter hole is repurposed so my MS3-PRO serial cable can bolt in place and I can just plug the Bluetooth adapter into the dash.
