Auto swap - interlock cable? Clutch switch?

[SVT3571]

Hello all,

Just a couple of questions regarding an auto swap cobra.

First, the auto shifter interlock cable. To install this, is it possible? I know on an auto car (factory) the 3 wires for the interlock plug come out of the harness in the footwell next to the center console and obviously the cobra harness doesn't have these coming out of it. Are the wires still there, maybe just tucked inside the plastic harness shield? Or do they just not exist?

Second, do I just cut the plug off the clutch switch and loop the wires?

Thanks!

 

[hotcobra03]

Home

in here is our manual

svt document's page scroll down

icon on left is link for downloading

works on a pc

has full wiring with connector location's

 

[hotcobra03]

https://link.gale.com/apps/CHLL?u=txshrpub100185

works on cell

 

[hotcobra03]

Chilton Library

 

[4sdvenom]

If you cut the wires from the clutch position sender switch and loop them out he car will be able to start in any gear, which I would not recommend.
What shifter are you going to use? Factory auto shifter or aftermarket?
If aftermarket I can tell you exactly what I did.

Ken