asked this before. but want to make sure !

[cobra=trouble]

look at my sig. if i go E-85 will 80s be enough with my other fuel stuff, i will add my 40 amp BAP on it . 305 cu in motor BTW.

what is best > get my 60s flowed to 80s by steig.
or just buy new 80s from tousley ford ?

dont want to go return set up. all my stuff is new

FPDC before was 82 % with no bap with the 60s with the 4.6
if it wont be enough fuel i wont do the E-85 then.
THANKS :beer:

EDIT:i got 2 gt 40 pumps not 3 btw.

 

[cobra=trouble]

well i guess i'am SOOL

 

[ZOSO]

I bet 80's and the BAP is all you'd need. Seems like you have the rails and lines with the fore hat and GT pumps.

 

[GodStang]

There is no way in hell I would port injectors. I would just get a set of 80s. Pretty sure with twin GT pumps and some 80s YOu should be able to do it with a good tuner.

 

[cobra=trouble]

There is no way in hell I would port injectors. I would just get a set of 80s. Pretty sure with twin GT pumps and some 80s YOu should be able to do it with a good tuner.

thanks GS. i dont know if i should do e 85 since theres only 2 stations in my city , 1 is way out in crack alley, the other on is 5 miles away..but this station may in the future go out of bussines or stop selling it .:shrug:

if i dont go e 85 ,should i get my injectors checked by steig.just to be safe? the 60s ?:beer: