I uploaded my Lund tune today and did my Idle and Neutral Rev datalogs. I've never done this before so I'm trying to find out if there's anything that stands out as a concern. There were a couple things that didn't add up to me.
First, was when I started the Idle datalog my tach would sometimes drop to zero but the car never hiccupped? It only does it when I'm datalogging so is that normal? Here's a video.
4D25209D-F8C3-49DF-9C33-BE66F1B7652E-608-0000006B126ABD15_zpsad573eea.mp4 Video by 0-60B4U | Photobucket
Secondly, when I replay the datalog on my SCT X3 the maf counts show 127-144 but when I transferred my log to Livelink Gen II they show as low as 0.52 and as high as 786. Isn't that way too much difference? I thought it should be no more than a 20pt swing either way? I cleaned the Maf and redid the datalogs with similar maf counts. I'll post copies of the datalogs in the morning if you guys don't mind looking at them and give me some advice I'd appreciate it. :beer:
First, was when I started the Idle datalog my tach would sometimes drop to zero but the car never hiccupped? It only does it when I'm datalogging so is that normal? Here's a video.
4D25209D-F8C3-49DF-9C33-BE66F1B7652E-608-0000006B126ABD15_zpsad573eea.mp4 Video by 0-60B4U | Photobucket
Secondly, when I replay the datalog on my SCT X3 the maf counts show 127-144 but when I transferred my log to Livelink Gen II they show as low as 0.52 and as high as 786. Isn't that way too much difference? I thought it should be no more than a 20pt swing either way? I cleaned the Maf and redid the datalogs with similar maf counts. I'll post copies of the datalogs in the morning if you guys don't mind looking at them and give me some advice I'd appreciate it. :beer:
