anyone using 275-60-15 M/T et street radial pro?

[Chuckie B]

looking into either going with a hoosier quick time pros, m/t et street radial pro or et street bias ply

opinions on these?
and how long of a burnout are you doing with these tires?

thanks,
cb

 

[Chuckie B]

Nobody?

 

[Dtony]

I run that tire. On my auto 2011 with a Vortech they are the best tire I have ran. My best 60' time so far is 1.41 on a track that is notoriously bad with not even a hint of tire spin. I also run 16 psi in them so they are stable at 140 mph down the track.

I do a 5 sec count for a burnout in 3rd gear.

I ran the Quick time pro's as well. They were ok, but didnt 60' as good as the MT pro's and only last me 30 passes and about 400 street miles. My first set it MT pro's last around 60 runs and probalby 1000 street miles.

 

[Eric@jpc]

Bad ass Tires we run them on a few cars!!

Best i have been is 1.21 60 foot

JPC - James Otto's 05 Mustang GT goes 8.51 on 275 Drag radials - YouTube

 

[Stevem17500]

Bad ass Tires we run them on a few cars!!

Best i have been is 1.21 60 foot

JPC - James Otto's 05 Mustang GT goes 8.51 on 275 Drag radials - YouTube

What psi do u run on these

 

[Benchracer]

What psi do u run on these

16-18psi is typical for these tires. Every car and every guage is going to be a little different.

 

[90secdak]

I run them on a 10" rim, they are the best Drag Radial out there but are not for street use run 17- 18 psi

if you run in a class where you must run a DOT tire.

 

[bossmustang18]

i run them on a 5 speed 3v. cut 1.6 60 ft's and my buddy does as well and cuts 1.5 60's on a 5 speed. its an awesome tire!