• Welcome to SVTPerformance!

Any strut tower brace fit over the 2.9 Whipple?

Discussion in 'Suspension Modifications' started by whipple1raptor, Jul 21, 2019.

  1. whipple1raptor

    whipple1raptor Active Member Established Member

    Messages:
    144
    Joined:
    Feb 3, 2019
    Location:
    Houston
    Hi all....

    Recently purchased a GEN 4 Whipple. Thinking about adding a strut tower brace to fit over this bad boy? Anyone know or have have one that’s doing the job currently?


    Sent from my iPhone using the svtperformance.com mobile app
     
  2. me32

    me32 BEASTLY SHELBY GT500 TVS Moderator

    Messages:
    14,680
    Joined:
    Sep 6, 2005
    Location:
    CA,NorCal
    Thats a good question. I would assume so. Maybe Kenny brown
     
  3. HudsonFalcon

    HudsonFalcon Well-Known Member Established Member

    Messages:
    4,583
    Joined:
    Mar 6, 2014
    Location:
    Upstate, NY
    MMSTB-8 should work.

    Kenny Brown works too me thinks but it mounts under the CC plates which is kinda lame.
     
  4. 94slowbra1

    94slowbra1 Well-Known Member Established Member

    Messages:
    2,552
    Joined:
    Feb 19, 2007
    Location:
    new orleans
    according to whipple the new gen 4 2.9 is the same height as the 2.3, i asked for this very reason. i have a 2.3 tvs now and the mmstb-8 clears with lots of room. it also cleared my 2.3 whipple i had previously. the only thing i can see being an issue is with the crusher inlet by the strut tower, the height should be fine though.
     
  5. 94slowbra1

    94slowbra1 Well-Known Member Established Member

    Messages:
    2,552
    Joined:
    Feb 19, 2007
    Location:
    new orleans
    Confirmed that the MM brace does clear the blower but the crusher intake is a different story. Its fits but it is very very close so I may clearance the stb little to allow some movement
     
    TP 112 and me32 like this.
  6. jdant

    jdant Member Established Member

    Messages:
    68
    Joined:
    Jun 16, 2016
    Location:
    Raleigh, NC
    Stifflers makes one for the 2.9L Whipple. They created it off my car. It has a JLT high boost. My whipple is a Gen 2.
     

    Attached Files:

    Stage 4.6 and Blkkbgt like this.

Share This Page