Anti roll bar and fuel lines

[Wings65288]

Anyone thrown in an ARB with their fuel lines routed here? Its a solid axel.

 

[03 Cobra DSG]

Mine are pretty much in the same spot


Sent from my iPhone using svtperformance.com

 

[Wings65288]

And you run an anti roll bar? What brand out of curiosity?

 

[03 Cobra DSG]

Mine are pretty much routed the same way, but they are against the body. I have the TeamZ grip series kit.


Sent from my iPhone using svtperformance.com

 

[apex svt]

Yes, it’ll fit. But will be tight. UPR street arb, pushes the links in to clear tailpipes.

 

[Wings65288]

Ok sweet. Actually i was probably gonna cut the tailpipes just after the muffler to avoid any fitment issues up there

 

[03 Cobra DSG]

TeamZ has two different ones, one you can run exhaust and one you have to have dumps


Sent from my iPhone using svtperformance.com

 

[Wings65288]

So you'd recommend installing the ARB OVER the fuel lines? I was worried it would be so tight that i wouldn't be able to get my AN fittings off if i ever needed to pull the lines for whatever reason.

 

[Wings65288]

To play devil's advocate i could do an under axel ARB. Dont know if it's as good

https://www.trzmotorsports.com/product/under-axle-anti-roll-bar/

 

[Wings65288]

MaximumMotorsports sell under axel as well

Adjustable Rear Swaybar, solid-axle Mustang, 1979-2004

think I'm going to go that TRZ one. Going to a junkyard this weekend and pulling a couple 94-98 rear end housings. I'm doing a 35 spline spool, c-clip elims, and lower control relocation instant center brackets. Basically just trying to get this thing to 60 foot the best i can

 

[03 Cobra DSG]

So you'd recommend installing the ARB OVER the fuel lines? I was worried it would be so tight that i wouldn't be able to get my AN fittings off if i ever needed to pull the lines for whatever reason.

No you have to install the ARB above the fuel lines


Sent from my iPhone using the svtperformance.com mobile app

 

[Wings65288]

Yeah i called up TRZ and he said I'm definitely gonna want the one above the axel and you're right, after i put a bar up there it's going to have to go under the lines. TRZ has A1 customer service fyi