All-Aluminum Aviator Build with FRPP DC Heads, Bullet Cams, JLT, Cobra Intake

Status
Not open for further replies.

BimmerGuy

Member
Established Member
Joined
Nov 3, 2014
Messages
39
Location
Florida
All-Aluminum Build with FRPP DC Heads, Bullet Cams, Manley Springs, JLT, Cobra Intake

FORTY-ONE parts for sale.

The engine is a one-year-only all aluminum 4.6L DOHC 32V Ford Modular V8 from a 2005 Lincoln Aviator with 77K on it (still has the LKQ tag. This is not a Johnny no-body backyard engine).

The 2005 Aviator was the ONLY production vehicle to get the FRPP "DC" cylinder heads. The DC heads were the last and best 4.6L C-heads ever made. They were sold by Ford Racing as FRPP upgrades for the 2003-2004 Terminator Cobra, Marauder, Mach 1, etc. due to their cooling and flow upgrades.

These parts are hard to find but I will not part out my collection. The ONLY way I would part it out is if someone bought the motor itself. This is pretty much EVERYTHING you need have one mean 4V. The following Aviator, Cobra, and Mach 1 parts are all included with the sale:

BBK 98 cobra Throttle body adapted to 99-01 Cobra manifold IAC ($170)
JLT Cold Air Intake for 99-01 Cobra/03-04 Mach 1 with MAF and filter ($200)
Ford Racing FRPP 30lb. fuel injectors ($130)
Walboro Ford Focus SVT Fuel Pump kit for Mustangs ($120)
RAM billet flywheel (seller said it had never been used and looks new) ($300)
RAM clutch with helix hub (new from AM) ($270)
Canton kicked-out high capacity oil pan ($300)
BBK Long Tube headers ($350)
BBK H-Pipe for Long Tube Headers ($100)

2005 Lincoln Aviator 4.6 DOHC engine (DC cylinder heads!) with low miles (77K) ($2400)
2005 Lincoln Aviator dual runner intake manifold (complete with some vacuum lines, IAC and MRC)
2005 Lincoln Aviator coolant crossover
2005 Lincoln Aviator fuel rail
2005 Lincoln Aviator alternator bracket
2005 Lincoln Aviator partial engine harness
2005 Lincoln Aviator Serpentine pulleys and 3 bolt serpentine tensioner
2005 Lincoln Aviator EGR tube, exhaust manifolds
2005 Lincoln Aviator fuel rail pressure sensor
2005 Aviator COPs

4.6 DOHC oil pan gasket set (Fel-Pro) OS 30725 R ($24)
Valve cover set VS 50477 R ($53)
Oil filter adaptor gasket 70801 ($12)
Timing cover gasket set TCS 45980 ($31)
Throttle body gasket
Motorcraft oil filter FL-820S ($4)
Intake manifold gasket set MS 92562 ($20)
Autolite double platinum fine wire spark plugs APP 104 ($36)

2001 mustang cobra intake manifold and throttle body ($450)
2001 mustang cobra throttle and cruise cables with bracket ($250)
2001 Mustang Cobra oil filter adapter with oil cooler housing and anchor tube ($150)
2001 Mustang Cobra thermostat housing with hoses ($60)
2001 mustang cobra TPS IAC and EGR control valve ($100)
2001 mustang cobra coolant crossover ($110)
2001 mustang cobra alternator bracket ($80)
99-01 mustang cobra oil pickup tube ($50)
2001 mustang cobra water pump inlet tube ($40)
2001 mustang cobra fuel rail with 05 aviator 24lb. injectors ($110)
2001 mustang cobra "roush take-off" alternator (seller said it had never been used) ($150)
2003 mustang mach 1 timing cover ($110)
2003 mustang Mach 1 EGR tube and valve ($35)

I will take $4000 for everything. That is $6215 worth of parts for $4000.

I also have a custom set of Stage 2.5 Bullet Racing N/A cams (2 of the 4 are brand new) that I would include for $700 extra ($1300 new) and will not sell separately. I'll include a set of Manley Valve Springs ($500 new) for $200 extra. A 2001 Cobra with these cams made 370rwhp which is over 440 to the crank. I might be willing to sell my 2V engine wiring harness (can be modified to run 4V) and computer with a Diablosport Predator along with the motor as well.

20150524_181208_zpspxnjeuo1.jpg


20150511_130130_zpstrvjzzxz.jpg


20150511_135234_zpshj0xzg3e.jpg


20150511_134725_zpsmwcf67ts.jpg


20150511_135521_zpsxfica8ak.jpg


20150511_135729_zpsduniqlaa.jpg


20150511_135822_zps9r8ypx5o.jpg


20150511_130307_zpsmb1zxuvp.jpg


20150511_130228_zpsyswetpk1.jpg


20150524_181349_zpszwfugodc.jpg
 
Last edited:

BimmerGuy

Member
Established Member
Joined
Nov 3, 2014
Messages
39
Location
Florida
Bullet Cams Specs:
Grind number: F04 268/270-130H. Duration at .050 INT 230 EXH 228.
Lobe lift INT .2640 EXH .2640. Separation 113 OP-CL.
Duration at .006 INT 268 EXH 270. Gross valve lift INT .475 EXH .475.
 
Status
Not open for further replies.

Users who are viewing this thread



Top