• Welcome to SVTPerformance!
ATTENTION!
You may experience intermittent issues while accessing the site over the next 60-90 minutes, as we perform maintenance and upgrades.

AED + Beefcake Paxton kit with torque booster on E85 = Fun!

Discussion in 'Power-Adders' started by notchy444, Nov 25, 2013.

  1. notchy444

    notchy444 New Member Established Member

    Messages:
    285
    Joined:
    Oct 26, 2012
    Location:
    San Diego, California, United States
    Yeah the nt05r hold 3rd gear when nice and warmed up, but 2nd is still useless. I have 3.73 gears and a 29 inch tire :( looking for a 15 inch rim and Mickey Thompson pro drag radials ASAP.
     
  2. rfugio68

    rfugio68 Member Established Member

    Messages:
    348
    Joined:
    Jul 3, 2013
    Location:
    Southern OC
    Beefcakes having a killer deal on 15" racestars. You should give me a joyride sometime man :)
     
  3. 331coupe

    331coupe New Member Established Member

    Messages:
    107
    Joined:
    Aug 14, 2009
    Location:
    Atlanta, GA
    Just a question, how the hell are you making so much torque with a centri?
     
  4. bam2012@TBR

    [email protected] Authorized Vendor Authorized Vendor

    Messages:
    697
    Joined:
    Oct 23, 2011
    Location:
    virginia beach, va
    It is because of the wastegate setup. Smaller pulley on blower with a wastegate gets the blower spinning faster and you get into the peak boost earlier in the rpm. I will be installing my 8 rib 3.15 pulley with wastegate this weekend.
     
  5. Stevem17500

    Stevem17500 New Member Established Member

    Messages:
    835
    Joined:
    Sep 4, 2012
    Location:
    California
    That would be nice u should cracked 600 torque.....i would personally put a 2.95 with a 10 pound spring
    Get that torque up to 650 or more
     
  6. 13DIB5.0

    13DIB5.0 New Member Established Member

    Messages:
    498
    Joined:
    Oct 24, 2012
    Location:
    Winston Salem NC
    Subd for 11lb spring and 3.1 pulley numbers will be ordering soon if we can achieve having all that midrange and keep peak around 7k without falling off
     
  7. beefcake

    beefcake Authorized Vendor Authorized Vendor

    Messages:
    7,374
    Joined:
    May 16, 2001
    Location:
    Cincinnati, OH
    the wastegate won't peak at 7k, that's not the design of it. it's going to peak around where the gate starts to open

    with a boss it should carry out more straight like seen here
     
  8. TexasStang4585

    TexasStang4585 Snake eater Established Member

    Messages:
    989
    Joined:
    Oct 2, 2012
    Location:
    League City, TX
    Question Beef......will the Boss intake mani hold up to boost when someone is close to 950rwhp reliably? Also on E85 and 11.1 compression what pulley will get me there, 2.75 or 2.85....I think those are the two smallest ones right?
     
  9. beefcake

    beefcake Authorized Vendor Authorized Vendor

    Messages:
    7,374
    Joined:
    May 16, 2001
    Location:
    Cincinnati, OH
    a 2.95 is about the smallest that we've seen with virtually no belt slip on an 8 rib setup. we run a 2.75, but it's a carbonite pulley
     
  10. TexasStang4585

    TexasStang4585 Snake eater Established Member

    Messages:
    989
    Joined:
    Oct 2, 2012
    Location:
    League City, TX
    By your guessimates if I would go down to the 2.95 pulley and I made 703rwhp on E85 with the 3.6 what rwhp do you think that should put me.....right at 900? Also any deals on the 8rib set-up for black friday?.....You can PM me.

    Thanks,
    Joe
     
  11. Stevem17500

    Stevem17500 New Member Established Member

    Messages:
    835
    Joined:
    Sep 4, 2012
    Location:
    California
    I doubt u will see 900 on 2.95 which approx 15psi.... i too am interested to see what 2.95 and 2.85 and 2.75 put up:beer:
     
  12. Stevem17500

    Stevem17500 New Member Established Member

    Messages:
    835
    Joined:
    Sep 4, 2012
    Location:
    California
    I'm wondering if a higher compression motor with less boost might be better if ur gone stick with corn....imagine a MMR pro mod block with sleeves 5.2L and 13/1 compression with 2.75 pulley would be prob b be 1200 whp capable
     
    Last edited: Nov 26, 2013
  13. Nasty5ohhh

    Nasty5ohhh Member Established Member

    Messages:
    146
    Joined:
    Aug 5, 2012
    Location:
    Texas
    3.3 and e85 should be right around 800whp. I can see 900+ on the 2.95. Beefcake made 1003whp on that pulley I believe. Correct me if I'm wrong though.
     
  14. Coyote'13

    Coyote'13 "He gone" Established Member

    Messages:
    977
    Joined:
    Apr 8, 2013
    Location:
    CA
    I'm running a wastegated setup as mentioned above as well at 9.7psi.
     
  15. notchy444

    notchy444 New Member Established Member

    Messages:
    285
    Joined:
    Oct 26, 2012
    Location:
    San Diego, California, United States
    Quick question, what is the psi with the 3.33? Just wondering how much the wastegate is bleeding off
     
  16. DNT H8

    DNT H8 Member Established Member

    Messages:
    397
    Joined:
    Apr 20, 2013
    Location:
    Myrtle Beach, SC
    So stock MT82 and clutch? And stock long block to boot?
     
  17. notchy444

    notchy444 New Member Established Member

    Messages:
    285
    Joined:
    Oct 26, 2012
    Location:
    San Diego, California, United States
    Yes and yes, e85 is an amazing thing! I should be at 700+Rwh and over 600+ ft/lbs now that I'm running the 11 lbs
     
  18. DNT H8

    DNT H8 Member Established Member

    Messages:
    397
    Joined:
    Apr 20, 2013
    Location:
    Myrtle Beach, SC
    Wow lol congrats...


    Let us know when you feel that clutch start to slip please...
     
  19. Stevem17500

    Stevem17500 New Member Established Member

    Messages:
    835
    Joined:
    Sep 4, 2012
    Location:
    California
    Manual probably yes...no way on auto.....i believe beefcake had 2.75 pulley when he got 1003...
     
    Last edited: Nov 26, 2013
  20. TexasStang4585

    TexasStang4585 Snake eater Established Member

    Messages:
    989
    Joined:
    Oct 2, 2012
    Location:
    League City, TX
    Good idea...I might look/consult with mmr about uping the compression if i do go with a promod block and supporting internals....i dont dd the car so i very rarely do i drive on 93. Since belt slip seems to be an issue with the 2.75/2.85 that might be the only option to get into the 950-1000 range with the paxton.
     

Share This Page