ABS Issue

[Jaceracer]

Hey guys i just recently put the belltech 2/3 spindle drop/ w hangers and shackles on my 03 lightning, now when coming to a stop my abs is kicking in, not everytime but more often then not. Has anyone had this issue? and if so what is the fix for it?

 

[DSG2003Mach1]

thats interesting.

no abs lights or anything?

My first thought was recheck the wheel speed sensors up front

 

[Jaceracer]

No light. I went ahead and put two new motorcraft sensors up front just to see and still does it.

 

[Jaceracer]

I'm going to double check alignment of sensors on the tone ring tonight and also check my spindle nut torque to make sure its not causing the sensor to read poorly. it could be something as stupid as that you never know of these damn trucks.

 

[Jaceracer]

i'm at a loss guys i have done everything i can think of besides a scan tool but i'm throwing no codes it only does it when coming to a stop not just normal breaking at higher speeds.

 

[Jaceracer]

thats interesting.

no abs lights or anything?

My first thought was recheck the wheel speed sensors up front

i'm just going to disable the abs i did the same thing on my 99 cobra and it did great. this is just an anomally i cannot figure out.

 

[DSG2003Mach1]

ya thats really odd, im at a loss unless its just a weird failure mode of the module

 

[Jaceracer]

I pulled the 10 amp fuse and cracked the odometer open and pulled the bulb, problem solved brakes are solid now.