A Few Pics of My Rides

[VegasSE]

Since everyone keeps telling me to post them, here you go.

2006 Gallardo SE special edition. There were only 250 of these made, and only 4 made with e-gear in Verde from what I am told. The car has well over $100,000 in modifications and $30,000 paint on top of the price of the actual car. This car has been 100% done by Heffner Performance in Sarasota Florida. For those of you who know modified Lamborghini's, Heffner is the class of the industry. The engine has been entirely removed and built bulletproof.

This vehicle makes over 1300awhp on Q16, 1016awhp on 100 octane pump gas. Now remember, this is WHEEL horsepower, not flywheel horsepower. You can also go back to a pump gas set up where the car makes 880awhp. The great thing about this car is that it retains all driveability. It drives just like stock until you get into the boost.

Mods.............
Engine Removal and Disassembly -
L.A. Sleeve Steel Cylinder Liners -
Carrillo Forged Rods -
Custom 9:1 CP Forged Pistons -
Polished Crank Journals -
Clevite bearings -
Balancing and Blueprinting of Engine -
Heavy Duty Clutch and Pressure Plate -
Twin Water Cooled Dual Ball Bearing Garrett 67mm Billet Wheel Turbos -
T04 S compressor w/72mm inducer
Garrett T4 four bolt discharge housings w/82 A/R ratio -
Two Tial 44mm wastegates -
Two Tial 50mm Blow Off Valves -
Custom Made Stainless Steel Turbo Midpipes -
Custom Made Stainless Steel Turbo Downpipes -
Custom Made Stainless Steel Exhaust System -
Stainless Steel Turbo Oil Feed Lines -
Stainless Steel Turbo Oil Drain Lines -
Colder Heat Range Spark Plugs -
High Flow Turbo Air Inlet Plumbing -
High Flow Turbo Air Discharge Plumbing -
Spearco twin Water to Air Intercoolers -
Water Pump -
Intercooler Water Reservoir -
All Braided Lines and Fittings -
255 lph in tank fuel pumps -
Upgraded Fuel Injectors -
K&N conical air filters -
Upgraded Gaskets and Fluids -
Upgraded Halfshafts -
AEM EMS -
Dual Maps controlled by switch -
Genuine Lamborghini OEM Superleggera Carbon Rear Diffuser -
Carbon Decklid -
Larger Brembo Rotors -
Full Body Clear Bra by Pro-Tech (over $5000) -
15% tinted windows -
Ceramic windshield covering -
K40 Calibre In Car Laser/Radar -
HRE 843R w/Textured Monoblock Finish -
Hoosier A6 315/30ZR19 rear -
Hoosier A6 235/35ZR19 front.

The vehicle had some rock chips on so before putting on the full body clear bra, it was ENTIRELY repainted the factory color. Brand new engine and twin turbo system have less than 600 miles!!! This car is basically BRAND NEW!

 

[VegasSE]

Engine:

Virtual Works 3.4 stroker
CP Flat Top Pistons
Carillo Rods (upgraded carr bolts)
Crower Balanced Billet Crank
Clevite bearings
Program Billet mains
Line honed block

Fully polished and ported Virtual Works race head
Competition Copper Alloy valve seats
Five angle valve job
Ferrea dual valve springs
Ferrea titanium valves +2mm
Ferrea titanium retainers
Ferrea valve keepers
Ferrea spring seats
Ferrea spring locaters
Ferrea valve guides
ARP L19 Head studs
HKS 280 Cams

Unorthodox Cam gears
Unorthodox Pulleys
BoostLogic crank pulley
BoostLogic Billet tensioner
Virtual Works Dual Rail 12 injector Intake Manifold
Accufab 95mm Polished Throttle body
Virtual Works 8 ½ Quart Aluminum Oil Pan
Virtual Works Modified Pickup for Deep Pan
Virtual Works Modified Oil Pump
Virtual Works Modified Water Pump
Toyota P/S pump (new)
Power Enterprises Kevlar Timing belt
Power Enterprises Kevlar Serpentine belt
Chromed Valve covers
Powerhouse Polished Spark Plug Cover
TTC Polished Brake Cap
TTC Polished ABS Relay Cover
Greddy Billet Oil Cap
Virtual Works Aluminum Fuse Box Cover
Virtual Works Breather with custom 1/1 Can
All Cosmetic Bolts Switched to Stainless Allen Bolts
Lines Converted to Braided
Polished + Black Fittings
Extensive Chroming
TRD motor mounts
High Output Chromed Alternator
New Engine Harness
Engine entirely stripped, holes welded, brackets ground, painted + cleared
Aluminum Belly Pan

Turbo + Exhaust:

Virtual Works coated turbo header T6
Tial 44mm wastegate
GT47-88mm Dual Ball Bearing turbo (polished and coated) T6
Virtual Works anti-surge turbo insert
Custom SP (chromed) 6” cold air intake
K+N 6 Inch Race Filter
Virtual Works Modified water neck (to fit large frame turbo)
Virtual Works 4 inch stainless coated downpipe
Virtual Works 4 inch stainless coated midpipe
Sound Performance 4 inch stainless electric exhaust cutout
HKS racing bov
HKS 4 inch Hiper Titanium Exhaust

Cooling:

PWR Brushed Aluminum radiator
Virtual Works Custom Brushed Aluminum Dual Fans (6000cfm)
Sound Performance 5 inch race Intercooler
Custom Virtual Works 4” polished intake piping
Virtual Works Polished Upper and Lower Intercooler Straps
TRD Thermostat
Virtual Works Upper radiator hard pipe chromed
Virtual Works Lower radiator hard pipe chromed
Virtual Works Upper radiator cooling plate chromed
Upper Radiator show plate chromed
Virtual Works custom 1/1 Aluminum Overflow can

Trans + Clutch:

New V160 6-Speed Transmission
Tilton Carbon Triple Disc clutch
Custom 1pc steel driveshaft (cnc’d ends)
Virtual Works Driveshaft Loop
TRD LSD
TRD Trans Mount
Virtual Works CnC’d Aluminum shifter bushings
C’s Short Throw Shifter
Strain gauge

Fuel System:

Weldon 2835 Fuel Pump
Weldon Fuel Pressure Regulator
Virtual Works Dual Fuel Rails w/12 1000cc Injectors
Bosch 1000 high impedance injectors
Custom AN Fuel Lines

Suspension:

Virtual Works custom rear suspension
Virtual Works mini tub
TRD Sway bars (Ceramic Coated Silver)
Cusco carbon rear strut bar
DoLuck Cross Bar
Tein Flex coilovers front (spun on lathe to remove green to show spun aluminum)
Koni coilovers w/Eibach springs rear
Tein EDFC controller
Titan Billet mount kit
Extended Rear Studs

Electrical:

Motec M800 Engine Management
All Motec Sensors and upgrades
HKS DLI Twin Power Ignition
Blitz turbo timer
AEM Boost Gauge
Defi Water Temp + Oil Pressure Gauges
AEM Serial Gauge
FJO Wideband gauge custom mounted
TRD 10K Tach
Optima Trunk relocated battery

Brakes:

Brembo 14 Inch Big Brake Kit Painted Lambo Verde
Slotted front + rear Brembo rotors
Goodrich Stainless brake lines

Wheels + Tires:

HRE 597R 18X10 front
HRE 597R 18X12.5 rear
Mickey Thompson ET Street Drag Radial (345/35/18)
BFG Gforce ZR front (265/35/18)

Interior:

TRD Black Steering Wheel
TTC Drilled Performance Pedals
10% Tinted Windows
New Carpet 33,000 miles
New Factory OEM mats
New Factory Black Leather seats
SP Rear Seat Delete

Exterior:

Genuine DoLuck Late Model Front Bumper
Genuine Bomex side skirts
Genuine TRD Hood
Genuine TRD Wing
Clear Signal Markers
Smoked Side Markers
Smoked Taillights
Smoked Third Brake Light
3M Clear Bra

Performance:

Tuned by Mike Angel of Factor-X
RWHP: 1418
RWTQ: 1008



Here it is with the stock hood/carbon wing on. I'm not sure which wing/hood set up I'm going with for sure. Most likely put the genuine TRD hood/wing back on the car.

 

[VegasSE]

2003 Mustang Cobra
28k Miles
No accidents, clean title
Freshly painted in flat black

Certified 12pt 8.5 cage powdercoated black
Stock seats and interior

Fully built 5.1 Stroker by Lawless Engines
380cfm Lawless ported heads
Fluidyne radiator
Maximum Motorsports complete front k-member package
Kooks 1 3/4x3' headers jet hot coated
Kooks 3' x pipe
Sullivan intake
Sullivan fuel rails
Upper adjustable clutch quadrant
Weapon x cop ignition set
Sieman deka 63lb flow matched injectors
Accufab single blade throttle body
Fore precision billet fuel hat W/ SINGLE 8an line
Complete fuel system with 8an line front to back all with black earls an fittings
Mcleoud street twins clutch
Twin Ford gt super car fuel pumps
Flamong river steering shaft
Dual fuel pump driver moduals
Procharger f1 cog pulley set up
Viper spec tranny from d&d motorsports
Billet shafts
Cryo treated gears
Virtual Works Racing custom intercooler set up
........and 100 other things I will list when I go through all the receipts on Friday.

 

[VegasSE]

2004 Mitsubishi Evolution 8

Chassis has 36k on it. Mods have less than 2k.

Engine:
Fully Built 2.3L Stroker
Fresh Core
Fully Sleeved Block by Darton
Crower 4350 Pro Series Billet Rods
ARP Rod Bolts
Crower 9310 Wrist Pins
Crower 4340 billet steel crankshaft 102mm stroke
CP Forged 9.5:1 Pistons
Crower Plasma Rings
ACL Race Bearings
ARP Main Bolts
Balance Shaft Eliminator

Buschur Racing Stage 3+ race head
Fresh Core
Ferrea dual stainless steel valve springs
Ferrea titanium retainers, locators, and locks
New Valve Seals
Custom BR Bronze valve guides
Supertech Nitride Coated Intake Valves
Supertech Nitride Coated Exhaust Valves
Stainless O-ring around each combustion chamber
Complete port & polish
New Bronze Valve Guides
ARP L19 Head Studs

Virtual Works Racing Aluminum Intake Manifold
Boomba Racing Billet 75mm Throttle Body
4 inch Aluminum Virtual Works Intake
AMS front and side engine mounts
ARC Radiator Cooling Panel
Black Powdercoated Valve Cover
BLE Billet Timing Tensioner
818 Billet Power Steering Cap
Sparktech COP Pro CDI-12
HKS 280/280 Cams
HKS Adjustable Cam Gears
Boomba Racing Billet Aluminum Pullies
Fluidampr Harmonic Balancer
Power Enterprises Kevlar Timing Belt
Power Enterprises Kevlar Accessory Belt



Fuel:
AMS Fuel Rail
AMS Fuel Lines
Fuel Lab Fuel Pressure Regulator Black
Bosch High Impedance 2000cc Injectors
Weldon 2345a Fuel Pump
AWD Motorsports Fuel Surge Tank
Design Engineering Triple Threat Nitrous/Purge System
VWR Modified Billet Dual Bottle Bracket
Design Engineering Bottle Heater


Exhaust:
Greddy Ti-C 80mm Cat back Exhaust System
Virtual Works Racing Stainless Downpipe


Turbo + Cooling:
Virtual Works Racing Coated T4 Race Header
Tial Polished 44mm Wastegate
Precision 6262 Dual Ball Bearing Billet Wheel Turbo
DEI Titanium Turbo Heat Shield

Extreme Turbo Systems Black Anodized 4 inch Intercooler
Virtual Works Modified Intercooler End Tanks
DEI CryO2 Intercooler Sprayer Kit
DEI CryO2 19X9 IC Sprayer Halo
Virtual Works Custom Stainless 3.5 inch Intercooler Piping
Virtual Works Stainless Intercooler Pipe Strapping
Tial 50mm Polished Q BOV

Virtual Works Upper Radiator Hard Pipe
Virtual Works Lower Radiator Hard Pipe
Fluidyne Aluminum Radiator
Mishimoto Race Thermostat
Blitz 1.3 bar radiator cap
Spal 10 Inch Low Profile Electric Fan
STM Billet Radiator Tie Downs

Virtual Works Custom Aluminum Overflow Can
Virtual Works Custom Aluminum Breather Can
Virtual Works AN Fitting/Braided Hose Breather Kit
AMS 25 Row Oil Cooler
Spal 5.6 inch Oil Cooler Fan


Transmission:
Shepherd Racing Stage 2
New throwout bearing
New clutch fork, pin and return springs
New speedometer gear and sensor
New slave cylinder and line
REM ISF process (sliders)
REM ISF process (gearset assembly)
Double synchro 5th gear option

Shepherd Racing Stage 3 Transfer Case
Quaife LSD front differential
8mm to 10mm bolt upgrade
New seals and o-rings
Reshimming
Neodymium magnet
REM ISF Process
New ring and pinion with bearings

Shepherd Racing Rear Differential
Cusco LSD
REM ISF Process Ring + Pinion
Buschur Racing Rear Moustache Bar
Buschur Racing Rear Billet Side Diff Mounts
Drive Shaft Shop Level 5 900HP Rear Axle/Hub Kit
Drive Shaft Shop Level 2 900HP Front Axles

Exedy Stage 5 T5001 Cerametallic Triple Disc
Exedy Chromoly Flywheel
New Throw Out Bearing
Drive Shaft Shop Aluminum Driveshaft
Buschur Racing Driveshaft Loop

Works Short Shifter
ARC Titanium Shift Knob
Kartboy Shifter Base Bushings
Kartboy Billet Shifter Bushings


Suspension:
Tien Monoflex Coilovers
ARC Front Strut Tower Bar
Cusco Rear Strut Brace
Cusco Front + Rear Sway Bars
Cusco V1 Lower Arm Bar


Wheels:
Volk Racing RE30 18x9 (black gloss powdercoated)
Volk Carbon Center Caps
Advan Neova AD08 265/35/18
Volk Racing Duralumin Lugnuts (black)


Brakes:
Endless Racing 6 Piston Race Front Brake Kit
Endless Racing 4 Piston Race Rear Brake Kit
Endless Stainless Covered Teflon Swivel Brake Lines
Endless Brake Pads
Zeal Slotted Rotors


Interior:
Rexpeed Carbon Fiber Dash
Custom Carbon Fiber Shifter Console
Rexpeed Carbon Steering Wheel Gauge Pod
Rexpeed Carbon A-Pillars
Ralliart Aluminum Door Sills
Mitsubishi OEM MR Carbon Fiber E-Brake
Tyrant Carbon Armrest
EVO SE Leather/Suede Seats
Black Suede Wrapped Evo 8 Steering Wheel
Mitsubishi JDM Double Din
Orbital HVAC conversion kit


Electronics:
Kenwood DNX8120 indash Nav/DVD
Rockford Fosgate Dual Amps
Boston Acoustics Front Mids
Boston Acoustics Front Tweeters
Boston Acoustics Rear Speakers
Boston Acoustics 10 inch Subs w/custom Fiberglass Enclosure
Greddy EGT gauge
Greddy Oil Temp gauge
AEM Boost gauge
AEM Wideband AFR Gauge
AEM Stand Alone EMS
AEM 5 Bar Map Sensor


Exterior:
Chargespeed Vented Carbon Hood
Chargespeed 20mm Front Fenders
Chargespeed Carbon Vortex Generator
Chargespeed Type 1 sideskirts
Chargespeed Type 1 front bumper
Chargespeed Type 1 rear bumper
Chargespeed Rear Carbon fiber diffuser
Rexpeed Ganador Carbon Fiber Side Mirrors
Rexpeed Carbon Fiber J-Panels
Rexpeed Winglet
Rexpeed Carbon Fiber Type-3 Trunk Wing
Mitsubishi Carbon Fiber Evolution VIII Trunk Emblem
Hyboost Performance Edged + Tinted MR headlights
Hyboost Performance Tinted taillights
Hyboost Performance Smoked Side Markers
Dafarmer LED License Plate Light
Custom Apex Silver w/ slight blue pearl in paint
Mitsubishi EVO MR Headlights
Evo XI Wing

 

[VegasSE]

This is one of only 43 Overfinch made Range Rover Sport Supercharged for 2007.

Overfinch tuned supercharged engine making 500 horsepower
Overfinch 22 inch rims with Pirelli P-Zero Scorpion 295/30/22
Overfinch Spoiler, Overfinch body kit
Overfinch Exhaust with chrome exhaust tips
Blacked out tail lights
smoked side markers
tinted windows
Body color side vents
honeycomb grill, deep sculpt front and rear bumpers
Brembo brakes
dynamic response suspension
Santorini Black Metallic exterior
Ebony premium leather heated seats
Walnut wood accents
Rear seat entertainment system with dual headrest tvs
14 speaker 550 watt Harmon Karden Logic7 surround sound stereo with subwoofer
electronic rear differential lock
adaptive cruise control
Land Rover alloy valve stem caps
clear bra
and a few other things I am sure I'm forgetting.

 

[01SVTSnake]

Looking to adopt?

 

[03cobra#694]

I`m up for adoption in case you wanted to know!

 

[03cobra#694]

Looking to adopt?

lol,ya beat me to it.

 

[VegasSE]

Looking to adopt?

I`m up for adoption in case you wanted to know!

If you are female, under 125lbs, and between the ages of 18-25 I'll consider it. Send pics.

 

[SVT03Chris]

Holy shit.

 

[Brizzal84]

I love the ROVER. Id like to see you 03 cobra. Nice cars bro!!!!!!

 

[VegasSE]

I love the ROVER. Id like to see you 03 cobra. Nice cars bro!!!!!!

I will put up some pictures of it when the rims are done being painted. I go through cars like CRAZY so pretty much everything is always up for sale or trade. I like to try just about everything once.

Here's one of my old Grand Nationals as well.

Sold all three. Here was my favorite one finished before I sold it.

 

[SVT03Chris]

Post pics of your Cobra

 

[Mentos]

Very nice vehicles!

 

[SVT03Chris]

What do you do for a living?

 

[01SVTSnake]

If you are female, under 125lbs, and between the ages of 18-25 I'll consider it. Send pics.

Well im 1/3 on that. Im between 18-25 lol

Your cars are nucking futs

 

[Tunink]

May I ask what you do for a living?

 

[VegasSE]

What do you do for a living?

Everyone always asks that. Might as well get it out of the way.

I own 4 companies..... Bombsquadgolf.com, Hyboost Performance, Insane Speed, and TAJ Luxury Imports.

 

[04spinbra]

May I ask what you do for a living?

he hit big on the slot machine!!! +1

 

[SVT03Chris]

DAMN. Well you are lucky as shit to have all those extremely nice cars.

You need a co-worker for the summer :thumbsup: