Hey i am installing my A/F gauge right now and need to know what harness the pigtail connector plugs into? Thanks its there pigtail right here http://www.southfloridapulleyhq.com/SFPH/cobra/ec_af_gauge_pigtail.htm
A/F install
- Thread starter 04cobratorchred
- Start date
anyone help please
ttt
If I were to guess, I would say it goes in-line with the front O2 sensor; either the right or left bank. Weren't there any instructions? You may want to wait until tomorrow to call SFPH.
No instructions would be way to easy why would they send them.
Looking at the picture of the harness, the green plug is definetely the O2 plug connection. For an A/F reading you want to be before the cat so disconnect the O2 plug (it is somewhat of a bitch reaching up towards the engine bay underneath the car). Plug the green O2 into the white plug of the harness and then the green plug of the harness up to the empty plug that you originally disconnected the O2 wire from. The other wires coming off the harness should go to the A/F gauge. Good luck!
its a narrow band. whats the difference what you plug it into? might as well make the lights strobe to the music on the radio.
They should plug into your rear 02 sensor plug... Go under the car, unplug one of the plugs on the sensor, and plug that harness into the plug you just unpluged
Get a wideband... Your wasting your time with that junk.
Users who are viewing this thread
