The car makes 410rwhp @6500rpm and 360FT\LB rwtq @5200rpm on a Mustang Dynojet with a very conservative tune. This car was built to handle much more power than it currently has as you can see by the parts listed below.
The rebuilt motor, TKO, Rear end and most of the parts have about 2k on them. The odo reads 59k. The paint is extremely glossy and receives lots of compliments. The car is very clean inside and out.
Motor
Forged motor with Diamond pistons and Manley rods
Polished S-Trim with 3.33 pulley (12psi)
Anderson motorsports power pipe
Innovators West 6% overdrive damper
MMR oil pump and 7 quart pan
New seals and bearings
Heads were cleaned and checked
ARP head studs
Entire rotating assy. Zero balanced
Carbon fiber IMRC Deletes
SCT BA2400 mass air flow sensor
SCT XcalII
Driveline
TKO 600 2-4th gears are faceplated
Pro motion H\R clutch assy.
New custom driveshaft
Lakewood Bell housing
Alum. Clutch quadrant and firewall adjuster
Rear end
4.30 gear
31 spline axels
Detroit True Track
Fuel system
Aeromotive A1000 pump
Aeromotive 12304 and 12301 fuel filter
Aeromotive 13101 FPR
UPR Fuel rails
42lb injectors
-10 supply and -8 return steel braded lines
Suspension
Eibach Pro Kit lowering springs
Maximum Motorsports Caster/camber plates
HPM Megabite Jr Lower Control arms
KYB AGX adjustable shocks
New HD upper control arms and bushings
Cooling system
Fluadyne Aluminum radiator
Mezier Electric pump
LDC Cooling mod
Exhaust
Ford racing shorty headers
Dr. Gas X pipe
Warlock II mufflers with dumps
Misc.
FR500 Wheels 17x9 front 17x10.5 rear
Oil pressure, water temp and boost gauge
Give me a call for more details. Im asking $13,900obo or possibly trade.
Chris
402-206-6601
The rebuilt motor, TKO, Rear end and most of the parts have about 2k on them. The odo reads 59k. The paint is extremely glossy and receives lots of compliments. The car is very clean inside and out.
Motor
Forged motor with Diamond pistons and Manley rods
Polished S-Trim with 3.33 pulley (12psi)
Anderson motorsports power pipe
Innovators West 6% overdrive damper
MMR oil pump and 7 quart pan
New seals and bearings
Heads were cleaned and checked
ARP head studs
Entire rotating assy. Zero balanced
Carbon fiber IMRC Deletes
SCT BA2400 mass air flow sensor
SCT XcalII
Driveline
TKO 600 2-4th gears are faceplated
Pro motion H\R clutch assy.
New custom driveshaft
Lakewood Bell housing
Alum. Clutch quadrant and firewall adjuster
Rear end
4.30 gear
31 spline axels
Detroit True Track
Fuel system
Aeromotive A1000 pump
Aeromotive 12304 and 12301 fuel filter
Aeromotive 13101 FPR
UPR Fuel rails
42lb injectors
-10 supply and -8 return steel braded lines
Suspension
Eibach Pro Kit lowering springs
Maximum Motorsports Caster/camber plates
HPM Megabite Jr Lower Control arms
KYB AGX adjustable shocks
New HD upper control arms and bushings
Cooling system
Fluadyne Aluminum radiator
Mezier Electric pump
LDC Cooling mod
Exhaust
Ford racing shorty headers
Dr. Gas X pipe
Warlock II mufflers with dumps
Misc.
FR500 Wheels 17x9 front 17x10.5 rear
Oil pressure, water temp and boost gauge
Give me a call for more details. Im asking $13,900obo or possibly trade.
Chris
402-206-6601
Last edited:
