91 Procharged Mustang GT

ratfinkron

New Member
Established Member
Joined
Feb 9, 2010
Messages
204
Location
Dallas,GA.
1991 mustang gt with 103xxx on the odometer
stock 302 bottom end, new rings, bearings, less than 2500 miles
trick flow (p/n TFS-K514-350-370) top end kit (heads, intake, cam, rockers, timing set)
70mm throttle body w/egr eliminator spacer
FMS 42lb injectors
Fuel Pressure Regulator w/gauge
SCT Big Air 2400 Maf sensor
SCT 5 Program switch chip
Procharger P1SC polished supercharger kit w/upgraded 3 core air charge cooler and blow off valve, (pullied for 13-14psi on 93 octane)
New Water pump
New Distributor
All new sensors and sending units on engine
MSD6AL box with MSD wires and Cap
Flowtech 1 5/8 shorty headers
High Torque Mini Starter
Aluminum 3 row radiator
Thermostatic controlled/manual electric fan
Flowtech 2 1/2 off road H pipe with Flowmaster mufflers and turndowns
New T5 transmission from ford
King cobra clutch with new clutch cable
Steeda Shifter
5 lug coversion kit with new brakes
Ford OEM Machined SVT cobra wheels- they are real not knock off's
New monroe shocks and struts all around
New Rack and Pinion unit with new tie rods
Rebuilt High Amp Alternator
FMS 3.73 gears
New Headlights, Taillights, Foglights
New Front and Rear Bumper Covers
New Hood mat
New Window Trim
New Window Tint
New Weatherstrip kit
New Exterior Door Handles
New Door Pins
New Hatch Shocks
New Quarter Windows
Fresh Paint (Dupont Mood Blue and Sebring Silver)
New switches on interior (door lock, window, fog lights, Multi function switch, mirror, etc)
New door lock actuators
Auto Gauge Brand Gauge set with add on pods (Boost, Oil Pressure, Temperature, Voltage)
5" tach w/shift light
Asking $10,000 cash and will consider trades for a Harley Road King, Street Glide and other bagger's and possibly 97-01 Cobra's and 03-04 Mach1's.
I can be reached @ 40455six4098 Ronnie, no calls after 9pm please and thanks for looking.
IMAG0087.jpg

DSC00789.jpg
 
Last edited:

ratfinkron

New Member
Established Member
Joined
Feb 9, 2010
Messages
204
Location
Dallas,GA.
Dyno'd 509 on 93 pump gas and I plan on retuning it, if I keep that is with a 10# pully and tune it down a little. I will get some interior pics when I get home.
 
Last edited:

ratfinkron

New Member
Established Member
Joined
Feb 9, 2010
Messages
204
Location
Dallas,GA.
This is the only interior pic I have right now but if you want more I will take some in the next few day's.
DSC00788.jpg
 

DTSVT03

Why try?
Established Member
Joined
Oct 28, 2004
Messages
1,835
Location
Anderson, SC
Want a 2003 black Mach 1 with 52k miles? It has the American Racing L/Ts with a 3" x-pipe and Borla Stinger c/b, also a 1" intake spacer, JLT cai, steeda triax shifter, eibach pro kit and 18x9 Mach 1 wheels.
mymach.gif
 

ratfinkron

New Member
Established Member
Joined
Feb 9, 2010
Messages
204
Location
Dallas,GA.
Yes and yes but the a/c needs to be figured out as to why its not currently working but most parts are new and its all there.
 

ratfinkron

New Member
Established Member
Joined
Feb 9, 2010
Messages
204
Location
Dallas,GA.
Wow, sorry for the delay in responding! Have not been on here in a while. I might be interested but I need to wait till my car is done before making any deals. Car is going to Mo's Speed Shop to be re-tuned and change a few things.
 

truefiveo

Active Member
Established Member
Joined
May 13, 2010
Messages
2,837
Location
Miami Beach
Wow, sorry for the delay in responding! Have not been on here in a while. I might be interested but I need to wait till my car is done before making any deals. Car is going to Mo's Speed Shop to be re-tuned and change a few things.

Are you gonna get the A/C fixed?
 

Leer5000

Member
Established Member
Joined
Feb 23, 2011
Messages
85
Location
Braham MN
i have a 97 Pacific green cobra with a vortech at 13lbs.

supposedly forged when i bought it, have no proof so until the pan is pulled, assume its not

Vortech T-trim-Polished
Anderson Ford Motorsport Pipe w/ Big Daddy MAF and filter
Kirban Fuel pressure regualtor and Walbro pump in tank
FRPP shorty headers with cermaic coat
Pypes catted x-pipe
Magnaflow cat back exhaust w/bullets and stainless tails
FRPP 4.30's w/ Auburn Posi and MAC rear Girdle
UPR full length weld-in subframe connectors
FRPP Aluminum driveshaft
Maximum Motorsports lower control arms & UPR adjustable uppers
Eibach suspension
Strange Adjustable front struts and rear shocks
spec stage 3+ w/FRPP billet flywheel 2000 miles on it if that
New Timing chains, guides and gears
Firewall adjuster & Steeda Tri-Ax short throw shifter
Autometer gauge Pod w/Phantom Fuel pressure, boost , oil pressure
Cervini's Cobra R Hood just painted but it didnt turn out that great
 

ratfinkron

New Member
Established Member
Joined
Feb 9, 2010
Messages
204
Location
Dallas,GA.
No I am not going to mess with the A/C. The fuel pump went out so putting a Holly 255lph for boosted applications in it. I have decided not to put anymore money in it so it sits as described except for new fuel pump. Also only looking for a Harley now. Thanks for asking though.
 

Users who are viewing this thread



Top