9.24 @ 150 JPC Turbo Kit 6r80 @ 3900 Lbs

Eric@jpc

New Member
Established Member
Joined
Jan 23, 2012
Messages
1,443
Location
Beltsville, MD
1426727_698866580143923_1700543793_n.jpg


Hey guys i wanted to give you guys an update on Al Davis's Car

For you guys that dont know who Al is here is a picture of his car
1451378_10201482490359216_1067320864_n.jpg


We Had been doing some testing back in the summer trying to get this car ready for 5.0 King of the street but couldnt make it do to a broken trans the day before we were do to leave.

Most of our testing over the summer months had been on a set of 20 inch vossen CV7s and NT05R drag radials. We manged to go 10.0 @ 144 of the 20s

This weekend was our 1st chance to run on some good tires. So as you can see from the time slip it was getting down. on the good tire

The Details of the car are.

JPC Turbo Kit with standard Turbo 76/75 Billet Wheel
Circle D 3B converter
RGR Engine with regrind cams
Stock 6r80 with upgraded clutches
E85 Fuel
ID1300s
JPC 2400 Fuel System
Race Weight was 3915
M/T 275 Pro Tire
Full BMR Suspension
3.15 Rear Gear

As you can tell the 60 foot is a bit lazy Al is still getting used to the 2 step. He was not able to Foot brake the car and get all the way on the 2 step its going to take some practice for him. So moral of the story is he left the line with about 1 PSI of boost this car should go 9.Teens once we get that 60 down.

Just want to Give a Big Congrats to Al and say this turbo is rocking. I cant wait to see what we can get out of it in the next week or 2
 

VIPERED91GT

Ford Technician
Established Member
Joined
Sep 11, 2009
Messages
173
Location
maryland
Ahh ok

Seen this car run at MIR last night... kept my eye on it...Didn't get to see that pass!! good stuff guys..
 

freiday13

New Member
Established Member
Joined
May 31, 2011
Messages
72
Location
arizona
Well that's the set up I'm Gunna do so now I kno what I can do. What's the limit on the stock block
 

D.T.R

New Member
Established Member
Joined
Dec 14, 2011
Messages
3,648
Location
Mexico
Hmmm 3B converter eh? Where does it lock up at? how much different is it from a 2B?
 

Eric@jpc

New Member
Established Member
Joined
Jan 23, 2012
Messages
1,443
Location
Beltsville, MD
Hmmm 3B converter eh? Where does it lock up at? how much different is it from a 2B?

With the 3b I can foot brake to about 3200-3400 but i have had alot of practice with this car. Al is still getting situated in the car.

Car locks up fine in High Gear. Shifts are perfect

I will have a video up soon

its about 400 looser then a 2 b
 

D.T.R

New Member
Established Member
Joined
Dec 14, 2011
Messages
3,648
Location
Mexico
Hmmm interesting. I just hope that this 2B is not too tight for the twins :(
Foot braking it to 3200+ seems legit to me.
 

Eric@jpc

New Member
Established Member
Joined
Jan 23, 2012
Messages
1,443
Location
Beltsville, MD
Hmmm interesting. I just hope that this 2B is not too tight for the twins :(
Foot braking it to 3200+ seems legit to me.

its going to take practice but you should get to 2800 on a warm trans

its tricky and will take seat time but its doable
 

Stevem17500

New Member
Established Member
Joined
Sep 4, 2012
Messages
835
Location
California
its going to take practice but you should get to 2800 on a warm trans

its tricky and will take seat time but its doable

What would happen if u stall up 2nd gear and go....i accident ally. Forgot to put in drive....launched 2nd from idle and got a 1.64 60ft on 18 rims nt05r is that bad for trans Eric
 
Last edited:

StevenStarke

Fast/Reliable/Cheap pick2
Established Member
Joined
Sep 16, 2011
Messages
1,262
Location
LI, NY
I saw this car last night too, looked amazing. Eric I thought you guys weren't there yesterday? I would have met up with you but I didn't think you guys were even there.
 

poof100

Member
Established Member
Joined
Oct 26, 2012
Messages
863
Location
VA
didn't this car have a t-56 in it at one point or?

You are probably thinking of my Turbo Boss 302 with the T 56 Magnum that JPC did. We had it out at the event as well, but were having issues.


Big Congrats to my buddy Al for rocking his new PB! Can't wait to see it go an 8.99 this weekend at Ford Fever! :burnout:
 

Users who are viewing this thread



Top