• Welcome to SVTPerformance!
ATTENTION!
You may experience intermittent issues while accessing the site over the next 60-90 minutes, as we perform maintenance and upgrades.

357W aluminum heads etc FS/FT

Discussion in 'Engine/Drivetrain' started by SignalZero, Dec 12, 2015.

  1. SignalZero

    SignalZero Eat mor Chikin Established Member

    Messages:
    1,886
    Joined:
    Oct 18, 2012
    Location:
    Florida
    Gauging interest in a spare 351W we have sitting on the stand. Looking to trade for a Coyote motor or 2,200 bucks. Located in central Florida and don't mind traveling a little for a trade. Seriously planning on doing a coyote swap in our fox for the track.

    1969 351W bored .030 with KB Hyperutectic pistons 11:1 comp.
    procomp SBF aluminum heads with 2.08/1.60 valves
    1.7 full roller rockers
    .514 306 duration hydraulic flat tappet cam (comp cams)
    cloyes double roller chain
    melling high volume pump
    matched intake
    Clevite bearings

    Shifting the motor @ 6,200 in a 2,900lb car it went 10.90-11.00 consistently. With a bigger cam and turning it up it should be a 10.50 motor in a fox. Car had a C4 with a 5k converter.

    PM if interested. Trying to convert my dad to the dark side :D motor probably has ~2,500 street miles before the heads and roughly 30 passes at the track. Pulled for a 393W that will also be for sale if we find a coyote.

    will post pics shortly.
     

Share This Page