325 width tires?

[corruptor]

anybody running 325s? See quite a bit of people running 305 or 315. Wondering if 325s will rub.

 

[Coyote'13]

I've posted a couple times about it. I have the dunlops in 325/30r20 and at stock height your good. My rear is lowered 2" now and sometimes it rubs inner and outer. What size rims are you running? Your offset needs to be spot on or your gonna be in trouble.

 

[mantis118]

325 50 15. Stock height boss 302. No rubbing

 

[bigriff85]

325 50 15 no issues

 

[Taderzngravy]

Does anyone run a 325 on a 18", 19" or 20" rim?

 

[truebluedevil02]

Does anyone run a 325 on a 18", 19" or 20" rim?

this^ a 325/30/20 would look good on my new wheels.

 

[Mr. Anderson]

just FYI, I've got 305's Nitto Invo's on a 19 x 11" forgestar rim. the car has a 1.25" drop with FRPP "P" springs. I have had a very slight hazing on the sound deadening material on the inner wheelwell, it's not enough to have taken material off the tire, but it has melted the plastic material. to do it safely on a 325 if it's a daily driver, I would recommmend "massaging" the inner wheel well.

 

[Stevem17500]

just FYI, I've got 305's Nitto Invo's on a 19 x 11" forgestar rim. the car has a 1.25" drop with FRPP "P" springs. I have had a very slight hazing on the sound deadening material on the inner wheelwell, it's not enough to have taken material off the tire, but it has melted the plastic material. to do it safely on a 325 if it's a daily driver, I would recommmend "massaging" the inner wheel well.

There a local guy at my shop has stock height wit 345/30/19 no rubbing as the owner stated

 

[Taderzngravy]

There a local guy at my shop has stock height wit 345/30/19 no rubbing as the owner stated

I would love to see pictures of this, Im due for a new desktop background.

 

[Mr. Anderson]

^ impressive if it all fits in the wheel well

 

[Stevem17500]

It's Def true...it's a nt05r tire looks massive from back il try to take a picture

 

[SUPERCHRGDJOHN]

325/30/19

http://www.svtperformance.com/forums/2012-2013-boss-302-mustang-373/970220-13-boss-325s.html

 

[GrnBullitt08]

They will fit... I've been running 325s since Spring 2013... Had the wheels made by Forgestar last year (Dec 2012)

 

[cb900f]

^^^^^ Specs on wheels???

 

[Taderzngravy]

GrnBullit, do the wheels stick out of the fender a little bit or is that just the angle of the picture?

 

[truebluedevil02]

http://www.svtperformance.com/forums/2012-2013-boss-302-mustang-373/970220-13-boss-325s.html

drool!

 

[GrnBullitt08]

^^^^^ Specs on wheels???

19x9 (+30mm), 19x11 (+53mm)

 

[GrnBullitt08]

GrnBullit, do the wheels stick out of the fender a little bit or is that just the angle of the picture?

They stick out 1/8"

 

[sadil]

They stick out 1/8"

Did you get an adjustable PHB and try centering the axle (from passenger to driver's side) or is the 1/8" on both sides? My axle pushed to the passenger side a fair bit wen I lowered the car.

 

[jbice03]

They will fit... I've been running 325s since Spring 2013... Had the wheels made by Forgestar last year (Dec 2012)

How close is your inner tire to your bump stop brackets? I'm waiting for my F14's to come in and I have the same size/offset in the rear. I ordered the FRPP 5300-L 1.25 springs and didn't like the look since I was only using the rear springs ( a little to much drop compared to the fronts) so I bought a set of roush rear springs and dropped the back just a little less than an inch. Oh I also have the Michelin pilot super sport 325/30/19 so I was just wondering how close I would be to those brackets. I'm going with a 9.5 front wheel with 35mm offset MPSS 275/35/19 and may still use the springs later once the wheels are mounted I will install the springs to see if they rub anywhere and just to see how it looks.