3.4 crusher e85

[White03vert]

What would be the ideal fuel system for e85 on a 5.3 stroker with cam only heads and a whipple 3.4 crusher setup??

right now I'm looking at the triple walbro 255 pumps on the fore triple pump return hat and I'm lost from there!

any help would be great

 

[GodStang]

That is near my setup just different blower. Triple Walbro pumps, Fore hat, -10an feed, Fore regulator, Fore rails, -10an return, and ID1000 injectors.

 

[stanzione88]

That is near my setup just different blower. Triple Walbro pumps, Fore hat, -10an feed, Fore regulator, Fore rails, -10an return, and ID1000 injectors.

^^^^
what he said is what you need, id1000's are great injectors and will support over 800rwhp on e85 without a problem.

 

[emerica4601]

Mine is similar as well.

Triple walbros in tank on a Fore triple hat
-10 feed, -8 return
105 lb/hr injectors


this is also on a 3.4 whipple .. 25psi

 

[saleencobra]

yea ur gonna need no less than 105's. but with that motor i'd go with the ID1000's or maybe even a little above that since ur gonna have a motor capable of making 1000hp

 

[GodStang]

yea ur gonna need no less than 105's. but with that motor i'd go with the ID1000's or maybe even a little above that since ur gonna have a motor capable of making 1000hp

His setup will see in the 800s if he runs a ton of boost. 80s are good to ~825rwhp on E85 and and ID1000 are probably good to at least 900rwhp on E85.

 

[White03vert]

Don't think Itll make it into the 900s with 25-26psi?

 

[emerica4601]

the bosch 105's are the highest lb/hr injector you can get that are high impedance. those other higher ones you'll need an injector driver