2014 auto to manual swap?

[99COBRA2881]

Looking at buying a salvage 14 GT to turn into my next American Iron race car.

Car I've found is an auto and I'd be swapping to a t56 magnum. Besides the clutch pedal assembly, brake master cylinder and associated parts, clutch and flywheel what else would I need?

Different trans harness is a given but what am I getting myself into with this swap?

 

[Sizeth3]

I know when I did my Airaid Modular Intake Tube, that there was an additional line running to the intake for the automatic tranmission. I would assume the manual transmission uses a different intake tube, or you could reuse the piece from the automatic and block off that vacuum port.

I am sure there are differences in the programming as well, but I am not up to speed on that.

 

[99COBRA2881]

Interesting this is sure a different animal from the 99-04s I am used to.

 

[auto02]

OP, good luck finding info on actually swapping an auto to a manual in a Coyote car even though it is for a justifiable situation. Pretty sure I've not heard of ANYONE that has done it.

 

[99COBRA2881]

Kinda what I thought, but it never hurts to ask.

 

[auto02]

You are right! I don't see you having any problems though.

 

[pierce88]

Perfect. So I'll drive to Kansas and You can take all the parts from my MT-82 car and we'll swap the Auto into my car.

Done and Done.

Let me know what weekend.

-Pierce