2013 SHELBY GT500 5.8L MOTOR FULLY BUILT BY JDM ENGINEERING. 1400+HP CAPABLE!!
$16,500 WITH THE MANIFOLD.
CALL 732-780-0770
From our Ebay:
Looking to Make Some Serious Horsepower?
YES?! Well, JDM Engineering has a 2013-2014 GT500 Spec Forged 5.8L Long-block available and is for sale at an all-time low price.
This engine will fit in any S197 Mustang engine bay especially the 2007-2014 Shelby GT500 cars. The engine comes complete with 2013 5.8L Aluminum block, Super Cobra Jet Crankshaft, JDM Engineering H-beam Rods by Manley, '13-'14 Forged Mahle Pistons, New Rings, Federal Mogul Performance Bearings, and completely blue printed and balanced rotating assembly.
The Heads are the new '13+ casting design and have a valve job with new stock springs and '13-'14 GT500/Ford GT Spec camshafts. We used brand new '13-'14 Head gaskets, Head bolts and torqued to spec.
The engine has brand new timing components and was fully timed by JDM Engineering engine builder Matt Kennedy. This engine comes complete ready to be dropped in with all the covers, 5.8L cast high capacity oil pan and 13' valve covers. Included is a Brand New Factory manifold and inter-cooler assembly!
**DON'T NEED THE INTERCOOLER? ANOTHER $1,500 OFF!!**
This engine comes with a 1 year limited warranty and 1000+ WHP rating!!!
**This engine was actually built for Steve Saleen's new 2014 S351 but he has decided to go with a factory production engine from the GT500. Since he is not going to purchase this one, we have it for sale at a discounted price to move it out of inventory. Steve's loss is your gain!**
If you are interested in this complete 5.8L Engine or know someone who is please contact us at 732-780-0770.
Some Pictures:
$16,500 WITH THE MANIFOLD.
CALL 732-780-0770
From our Ebay:
Looking to Make Some Serious Horsepower?
YES?! Well, JDM Engineering has a 2013-2014 GT500 Spec Forged 5.8L Long-block available and is for sale at an all-time low price.
This engine will fit in any S197 Mustang engine bay especially the 2007-2014 Shelby GT500 cars. The engine comes complete with 2013 5.8L Aluminum block, Super Cobra Jet Crankshaft, JDM Engineering H-beam Rods by Manley, '13-'14 Forged Mahle Pistons, New Rings, Federal Mogul Performance Bearings, and completely blue printed and balanced rotating assembly.
The Heads are the new '13+ casting design and have a valve job with new stock springs and '13-'14 GT500/Ford GT Spec camshafts. We used brand new '13-'14 Head gaskets, Head bolts and torqued to spec.
The engine has brand new timing components and was fully timed by JDM Engineering engine builder Matt Kennedy. This engine comes complete ready to be dropped in with all the covers, 5.8L cast high capacity oil pan and 13' valve covers. Included is a Brand New Factory manifold and inter-cooler assembly!
**DON'T NEED THE INTERCOOLER? ANOTHER $1,500 OFF!!**
This engine comes with a 1 year limited warranty and 1000+ WHP rating!!!
**This engine was actually built for Steve Saleen's new 2014 S351 but he has decided to go with a factory production engine from the GT500. Since he is not going to purchase this one, we have it for sale at a discounted price to move it out of inventory. Steve's loss is your gain!**
If you are interested in this complete 5.8L Engine or know someone who is please contact us at 732-780-0770.
Some Pictures:
Last edited: