2007 GT500 complete engine-$11000

[TreFoose]

I have decided to step up and build a motor with twins, so instead of destroying this one, I am going to sell it and go with a built set-up.

It is out of a 2007 model. Just a tick over 4800 miles. It runs FLAWLESSLY!!! It has never been abused and has never had any repairs made...warranty or otherwise. STILL IN CAR. CAN HEAR RUN AND DRIVE!!! It will come complete minus ECM and wiring harness. It is just like the M-6007-C54 crate engine in the FRPP catalog.

Details found here http://www.fordracingparts.com/parts...tKeyField=9560

The cheapest I have seen these is $14,999 in Summit. $11,000 takes this one. Perfect for swaps or high end rod projects.

Also have Dynatech 1-7/8" primary headers for sale for additional $500.

Please e-mail at [email protected] for pics or info

 

[Dan Schoneck]

If you are building a new motor it will be cost effective to tear this motor down to the short block and use all the acc, and pieces off this motor or you will find your self spending your 11000 plus some. It is very expensive once you start buying parts from ford
Intake is about 2100
oil cooler 800
timing cover 800
lifters,rockers 900
idlers and pulley tensioners 1000.00
p.s pump, alt, ac pump 1000,00
timing chains and all hardware 500.00
valve covers 300
heads as castings 1400-2000
misc bolts 250.00
water pump 85
coolant hoses 250.00
thermostat housing 800
Anyways your better off taking this thing down to the short block and offing that.
Just a heads up as i have already done it and found out the hard way. Most of these prices are at my cost at ford also.

later Dan and good luck with the sale.