2005 Mustang GT/Saleen Procharger F1, 6spd, 675 rwhp
Up for sale is a 2005 Mustang GT w/ a Stage 2 Saleen package. I have a folder that contains info for every part put on it, engine blueprints/specs, receipts, etc. The car was completely rebuilt in 2010 w/ 41k miles. 7k miles on new motor, 9k miles on every other part on the car. There is a lot of money in the car.
Engine-
-284ci 9:1cr Panhandle Performance built
-Manley 14cc dish pistons w/coated skirts/1.2mm offset tool steel pins
-Manley H-beam SVT rods
-Total seal SS rings (AP top, NAP second, H-TNS)
-Kellog Forged "Cobra Crank"
-ATI super damper balancer
-Moroso 7 qrt aluminum deep sump oil pan
-FRPP CNC ported 53cc 3V heads
-COMP custom grind blower cams (have cam cards in folder)
-COMP 20* phase limiters
-COMP beehive springs w/ steel retainers
-ARP head studs
-Brisk Silver Racing plugs
Induction-
-FRPP intake manifold
-FRPP twin 62mm throttle body
-SCT BA-5000 MAF
-Procharger 3-core intercooler w/ 3 inch piping
-Procharger ?Big Red? race valve
Power Adder-
-F1-A Procharger 12-rib w/ 4.75in and 3.7in pulleys
Fuel-
-FORE triple hat return
-3 Walbro GSS342 fuel pumps (1 not installed)
-FORE F2 regulator
-FORE Y-block 3 to 1
-FORE Y-block 2 to 1
-FORE fuel rails
-FRPP 60 lb/hr injectors
-(-6/-8) stainless steel braided fuel line
-AN high flow fittings
Exhaust-
-Kooks Long tube 1 5/8 to 2 ½ collector w/ Stage 8 lockers
-Kooks High Flow X pipe w/ gutted cats
Drivetrain-
-TR6060 6 speed transmission
-GT500KR short throw w/ FRPP shift knob
-Dynotech aluminum driveshaft
-SPEC 8 bolt aluminum flywheel
-SPEC 3+ clutch and pressure plate
-33 spline Auburn pro differential
-Moser 33 spline axle w/ 9 in bearings
-3.55 gears
-FRPP differential cover
-Welded axle tubes
Suspension-
-BMR tubular K member
-BMR lower controls arms
-BMR adj. upper control arms
-BMR adj. panhard bar
-Saleen N2 racecraft struts/shocks/springs/swaybar
Interior-
-Autometer/procharger boost gauge
-Autometer/procharger fuel pressure gauge
-Autometer oil pressure gauge
-Innovate MTX-L wideband (right bank)
-Speed of Sound triple pillar pod w/ raptor shift light -SCT Livewire
-Black leather interior
-Tinted windows
Stereo-
-Pioneer AVIC-D3 head unit
-Kicker 1500 watt amp
-3 Kicker Comp 10? in custom fiberglass box
-2 Kicker Comp 8? door panel
Wheels-
-HD MSR 20x10(r) 20x8.5(f)
(Toyo Proxes 275/35R20(r) Toyo Proxes 255/35R20(f)
***The car made 675/550 @14 psi @17* of timing on 93 octane on FastLane Motorsports Dyno. The blower isn't even working hard yet. There are 3 custom tunes in the programmer, one from Fastlane Motorsports and 2 from VMPtuning***
$24,000 obo, would consider a clean Fox Body DD and some cash too, email questions to [email protected]
2005 F1 GT Mustang FOR SALE - YouTube
Up for sale is a 2005 Mustang GT w/ a Stage 2 Saleen package. I have a folder that contains info for every part put on it, engine blueprints/specs, receipts, etc. The car was completely rebuilt in 2010 w/ 41k miles. 7k miles on new motor, 9k miles on every other part on the car. There is a lot of money in the car.
Engine-
-284ci 9:1cr Panhandle Performance built
-Manley 14cc dish pistons w/coated skirts/1.2mm offset tool steel pins
-Manley H-beam SVT rods
-Total seal SS rings (AP top, NAP second, H-TNS)
-Kellog Forged "Cobra Crank"
-ATI super damper balancer
-Moroso 7 qrt aluminum deep sump oil pan
-FRPP CNC ported 53cc 3V heads
-COMP custom grind blower cams (have cam cards in folder)
-COMP 20* phase limiters
-COMP beehive springs w/ steel retainers
-ARP head studs
-Brisk Silver Racing plugs
Induction-
-FRPP intake manifold
-FRPP twin 62mm throttle body
-SCT BA-5000 MAF
-Procharger 3-core intercooler w/ 3 inch piping
-Procharger ?Big Red? race valve
Power Adder-
-F1-A Procharger 12-rib w/ 4.75in and 3.7in pulleys
Fuel-
-FORE triple hat return
-3 Walbro GSS342 fuel pumps (1 not installed)
-FORE F2 regulator
-FORE Y-block 3 to 1
-FORE Y-block 2 to 1
-FORE fuel rails
-FRPP 60 lb/hr injectors
-(-6/-8) stainless steel braided fuel line
-AN high flow fittings
Exhaust-
-Kooks Long tube 1 5/8 to 2 ½ collector w/ Stage 8 lockers
-Kooks High Flow X pipe w/ gutted cats
Drivetrain-
-TR6060 6 speed transmission
-GT500KR short throw w/ FRPP shift knob
-Dynotech aluminum driveshaft
-SPEC 8 bolt aluminum flywheel
-SPEC 3+ clutch and pressure plate
-33 spline Auburn pro differential
-Moser 33 spline axle w/ 9 in bearings
-3.55 gears
-FRPP differential cover
-Welded axle tubes
Suspension-
-BMR tubular K member
-BMR lower controls arms
-BMR adj. upper control arms
-BMR adj. panhard bar
-Saleen N2 racecraft struts/shocks/springs/swaybar
Interior-
-Autometer/procharger boost gauge
-Autometer/procharger fuel pressure gauge
-Autometer oil pressure gauge
-Innovate MTX-L wideband (right bank)
-Speed of Sound triple pillar pod w/ raptor shift light -SCT Livewire
-Black leather interior
-Tinted windows
Stereo-
-Pioneer AVIC-D3 head unit
-Kicker 1500 watt amp
-3 Kicker Comp 10? in custom fiberglass box
-2 Kicker Comp 8? door panel
Wheels-
-HD MSR 20x10(r) 20x8.5(f)
(Toyo Proxes 275/35R20(r) Toyo Proxes 255/35R20(f)
***The car made 675/550 @14 psi @17* of timing on 93 octane on FastLane Motorsports Dyno. The blower isn't even working hard yet. There are 3 custom tunes in the programmer, one from Fastlane Motorsports and 2 from VMPtuning***
$24,000 obo, would consider a clean Fox Body DD and some cash too, email questions to [email protected]
2005 F1 GT Mustang FOR SALE - YouTube
Last edited: