2003-2004 Cobra intercooler pump replacement (video)

2003CobraOx

Member
Established Member
Joined
Jun 15, 2015
Messages
46
Location
SW, Ohio
My replacement pump is on its way, so a huge thanks for the video! Very concise and nicely edited with only useful information.

One simple tip is to use something like this to pinch off the hoses connected to the pump prior to unhooking them:
http://www.harborfreight.com/radiator-hose-pinch-off-pliers-99704.html
or
http://www.harborfreight.com/4-piece-fluid-line-clamp-set-65116.html

If you are NOT replacing the coolant then these will keep the vast majority of the coolant in the system. Otherwise, they can greatly minimize that amount that spills/splashes all over by letting you direct the hoses into a bucket before releasing the clamps.

Thanks again for the excellent vid!
 

xsellr8

BANNED
Established Member
Joined
Dec 10, 2010
Messages
1,859
Location
La La Land
My replacement pump is on its way, so a huge thanks for the video! Very concise and nicely edited with only useful information.

One simple tip is to use something like this to pinch off the hoses connected to the pump prior to unhooking them:
http://www.harborfreight.com/radiator-hose-pinch-off-pliers-99704.html
or
http://www.harborfreight.com/4-piece-fluid-line-clamp-set-65116.html

If you are NOT replacing the coolant then these will keep the vast majority of the coolant in the system. Otherwise, they can greatly minimize that amount that spills/splashes all over by letting you direct the hoses into a bucket before releasing the clamps.

Thanks again for the excellent vid!

That's a neat tool. Thanks for showing me that.
 

Users who are viewing this thread



Top