2.6 kb question

[Sprayed2v]

So I'm about to purchase a 2.6 kb for my 03 cobra. I'm curious about what the numbers will be. Car has kooks long tubes 1 5/8th, jlt intake o/r x pipe with MagnaFlow mufflers. I'll be upgrading the fuel system and maf when I do the swap. I want to make 600+ to the ground. What else will i need for this?

 

[ctgreddy]

you should have no issues getting to 600whp. pulley it for ~18lbs and you'll be happy. As far as what else you'll need, you have exhaust part done. If you dont have a nice intake/sbtb you should look into one of those. I'd look into one of the jlt nexgens and the accufab tb.

For supporting mods I'd say depending on which intake you get either use a stock maf/housing and a mafia, or a nice ba3000. For fuel you'll need 60's and atleast a bap or a set of gt pumps. That should be it and let the sucker run!

 

[Sprayed2v]

I forgot to mention that I have a accufab single blade sitting in my man cave room lol, been there for a few months. I also already have a jlt nexgen on the car.

 

[ctgreddy]

well awesome, sounds like all you need is the blower kit and injectors/maf/bap.