2.3L Whipple OIL questions!!

Slowbra21

New Member
Established Member
Joined
Dec 16, 2012
Messages
67
Location
NY
MY whipple looks to be low on oil but im not too sure if that's within the

normal range. Do I need to add a little more?

Here are the pics of how much oil is in it

USed
 

Slowbra21

New Member
Established Member
Joined
Dec 16, 2012
Messages
67
Location
NY
Can I use GM part number 12345982? What do I fill it up to like half way up the window? Do I have too suck all the old oil out or can I just add new on top?
 

cj428mach

Well-Known Member
Established Member
Joined
Sep 21, 2012
Messages
7,609
Location
Kansas
There is a drain plug on the bottom of the whipple but that might get messy on the car. I'm currently running GM oil in mine as my small town is dominated by GM dealerships.

I assume that picture was taken with the blower not running correct? Mine reads full when its off but when its running you almost don't see anything in the sight glass but that's because its being flung all over the blower case.
 

Slowbra21

New Member
Established Member
Joined
Dec 16, 2012
Messages
67
Location
NY
One more question the oil is changed through that alan key hole above the oil sight window right?
 

cj428mach

Well-Known Member
Established Member
Joined
Sep 21, 2012
Messages
7,609
Location
Kansas
The fill plug is on top of the blower if I remember correctly. I filled it last year when I put it on and haven't touched it since.

Here is a pic of mine. you can see the fill plug on the top left side of the blower on the flat machined surface.

24qlrpf.jpg
 
Last edited:

Users who are viewing this thread



Top