This car is road race ready, has over $15,000 in modifications, unfortunately has to go do to me moving out of state, this car is spotless, had clean carfax and is ready to go to a nice new home... asking $11,000 but will consider all reasonable offers ...please email [email protected] for pics as I don't know how to post them on this sight :??: and for more info .. thanks for your interest
1994 Mustang SVT Cobra 54,000miles
#534 of 5500
347 Stroker
Dyno-tuned by EJ’S Dyno shop in Omaha, NE
at the flywheel Superchips custom tuned chip. 377HP 432 FT LB
Approx. 5000 miles on new motor
Engine specks: M-6009-C347 5.0L Sportsman block
Forged aluminum .030 overbore pistons
3.40 Stroke forged steel Stroker crank
M-6200-050 Forged steel connecting rods
Balance for 28.2 in./oz. Damper/flywheel
M-6250-z303 hydraulic roller cam
Mac 1-5/8 Long tube headers
Stock upper intake extrude honed, port matched
Stock lower intake, ported port matched
Trick flow aluminum heads
(2.02 intake. 1.60 exhaust, ported port-matched
3-angle valve job
1.6 Stud mounted roller rockers
M-9593-b302 30lb. Injectors
Miloden 7qt. Race oil pan
70mm throttle body
80mm mass air flow sensor
BBK 190lph fuel pump
Mac pro chamber 2-1/2” H-pipe
Mac 2-1/2” cat-back exhaust w/turn downs
Stainless steel brake lines
Yellow stuff race pads
Strut tower brace, subframe connectors
Progressive rate springs
Rear lower control a-arms
Adjustable struts, shocks, panhard bar, caster & camber plates
Engine oil cooler, aluminum radiator
Hi-flow water pump, electric fan controller
King cobra clutch. Brake cooling ducts
3.55 gears torsion locking rear end
Security system, 4-point schroth racing harness
Fire extinguisher
Cirvini cobra r hood
95’ Cobra r wheels
1994 Mustang SVT Cobra 54,000miles
#534 of 5500
347 Stroker
Dyno-tuned by EJ’S Dyno shop in Omaha, NE
at the flywheel Superchips custom tuned chip. 377HP 432 FT LB
Approx. 5000 miles on new motor
Engine specks: M-6009-C347 5.0L Sportsman block
Forged aluminum .030 overbore pistons
3.40 Stroke forged steel Stroker crank
M-6200-050 Forged steel connecting rods
Balance for 28.2 in./oz. Damper/flywheel
M-6250-z303 hydraulic roller cam
Mac 1-5/8 Long tube headers
Stock upper intake extrude honed, port matched
Stock lower intake, ported port matched
Trick flow aluminum heads
(2.02 intake. 1.60 exhaust, ported port-matched
3-angle valve job
1.6 Stud mounted roller rockers
M-9593-b302 30lb. Injectors
Miloden 7qt. Race oil pan
70mm throttle body
80mm mass air flow sensor
BBK 190lph fuel pump
Mac pro chamber 2-1/2” H-pipe
Mac 2-1/2” cat-back exhaust w/turn downs
Stainless steel brake lines
Yellow stuff race pads
Strut tower brace, subframe connectors
Progressive rate springs
Rear lower control a-arms
Adjustable struts, shocks, panhard bar, caster & camber plates
Engine oil cooler, aluminum radiator
Hi-flow water pump, electric fan controller
King cobra clutch. Brake cooling ducts
3.55 gears torsion locking rear end
Security system, 4-point schroth racing harness
Fire extinguisher
Cirvini cobra r hood
95’ Cobra r wheels
Last edited:
