1993 Coupe - Dart 347, On3 Turbo, Magnum T56, ~63k miles

Doty

Member
Established Member
Joined
Dec 13, 2012
Messages
38
Location
Omaha, NE
Man this is one sweet ride. Not too far away either as I'm in NE kansas. Really wish it was an AC car... looking for something like this that could be a fun street toy and still enjoy cruising around

Just roll the windows down and drive a little faster! Haha
 

89 5.0

Member
Established Member
Joined
Aug 12, 2011
Messages
311
Location
WI
Hey man. I've very interested in the car. Can you send me any interior pics. Any issues? Or anything that still needs to be completed on the car?
1993 Ford Mustang LX
62,700 miles
Omaha, NE

Engine

  • Dart Iron Eagle Block
  • Eagle crank and H beam rods
  • Ross Racing Pistons
  • AFR 185 heads
  • Trick Flow Track Heat Intake
  • Trick Flow Valve Covers, vented to catch can
  • FTI Custom Cam
  • Scorpion 1.6 Stud Mounted Rockers
  • Trick Flow Pushrods
  • SFI spec balancer
  • 7 qt double sump pan, bung welded for oil return
  • ARP hardware throughout
  • ACCEL plug wires, ceramic boots
  • RAM SFI spec flywheel
  • Holley 70mm throttle body

Turbo Kit

  • On3 Performance 70mm kit
  • Ceramic coated hot side
  • Larger treadstone flex coupler
  • Comp Turbo turbo blanket

Drivetrain

  • Tremec T56 Magnum
  • Stifflers cross member
  • Spec 3+ clutch
  • QuickTime bell housing
  • Steeda Tri-Ax shifter handle
  • Aluminum Driveshaft
  • 3.55 gears in stock 8.8

Fuel System


  • Aeromotive A1000 pump, 0714 date stamped, 10 and 100 micron filters
  • -8AN supply, -6AN return, steel braided lines
  • Aeromotive fuel rails
  • Aeromotive adjustable fuel pressure regulator
  • Aeromotive fuel pump speed controller
  • Aeromotive sumped tank
  • 80lb Siemens deka injectors

Interior

  • all original black interior
  • 140 MPH speedo
  • Autometer Phantom boost and fuel pressure gauges, in center vent

Exterior

  • All original body panels
  • Repainted by previous owner 2-3 years ago
  • Small dent on hood
  • Small dent above drivers side taillight
  • Weld Draglites with M/T ET Streets, 275/50/15

Suspension

  • UPR chromoly k member
  • Maximum Motorsports ¼” k member spacers
  • 1 coil was cut off the front springs
  • the rest is stock

Ignition

  • MSD 6AL box
  • New Street Fire coil
  • New MSD cap and rotor
  • Motorcraft distributor

Miscellaneous

  • Thermostat controlled electric fan
  • SCT BA5000 MAF, flange welded to intake pipe
  • Optima Red Top, mounted in trunk
  • Dyno tuned by Excessive Autosports in Sioux Falls, SD, made 666/664 on 13.5 psi

Price is $15,000, I'm pretty firm on the price. PM if you have any questions. I'll be adding some more pictures tonight.

View attachment 23978
View attachment 23979
View attachment 23980
 

BlackedSVT

Member
Established Member
Joined
May 18, 2012
Messages
168
Location
DC
Do you know who the car was bought from in FL? I purchased a Fox in Florida sight unseen...also with a 306 in it, cracked crankshaft on a normal pull off a roll/stop sign.
 

Doty

Member
Established Member
Joined
Dec 13, 2012
Messages
38
Location
Omaha, NE
Do you know who the car was bought from in FL? I purchased a Fox in Florida sight unseen...also with a 306 in it, cracked crankshaft on a normal pull off a roll/stop sign.
No, I don't know who the previous owner in Florida was.
 

Users who are viewing this thread



Top