1993 cobra for Sale

darcysheppard

Member
Established Member
Joined
Nov 7, 2010
Messages
103
Location
ontario
This is my 1993 cobra for sale #2758, please review pictures attached via photobucket. You can also review my other units i have so you can see how i keep all my units. i am not listing the price or what has been done to car.

If you are interested in car please contact me as i will then send you private message and we can talk. I know what i have spend on this car and what a clean cobra is worth so please no dreamers.

Car is low miles, original, paint and original interior. Car has been modified, but reveiw all pictures please before you comment on mods.

thx Darc

i have enclosed trailer and i am willing to help with delivery to lower US 48

CAR HAS SOLD!!!!!!! THX FOR LOOKING



darcysheppard's Public Profile on Photobucket.com
 
Last edited:

89 az ssp

F-16 Crew Chief
Established Member
Joined
May 24, 2004
Messages
975
Location
RAF Lakenheath
Wow! What a fine example of a Cobra. You have taken attention to detail to a whole new level. Good luck on the sale!
 

darcysheppard

Member
Established Member
Joined
Nov 7, 2010
Messages
103
Location
ontario
Wow! What a fine example of a Cobra. You have taken attention to detail to a whole new level. Good luck on the sale!

thx man!!!! you have no idea how much attention to detail has been paid to this car every nut and bolt was removed polished and reinstalled. This unit was perfect before i started and i went one above that.
 

SVT_Troy

Well-Known Member
Established Member
Joined
Jun 23, 2011
Messages
5,324
Location
Virginia
Damn man this is the cleanest cobra i think Iv'e ever seen! How much are you asking?
 

BrettT 93|03

93 & 03 Cobra Venom
Established Member
Joined
Jun 15, 2004
Messages
428
Location
Maryland
Very nice collection Darcy! :rockon:

I came across the Mystic within your photo's.... is that AaronStiles Mystic from here in the states? Like the switch over to the all black bullet seats. :beer:
 

darcysheppard

Member
Established Member
Joined
Nov 7, 2010
Messages
103
Location
ontario
Beautiful Cobra!! Superb build!! Bravo... Bravo!!

Thx guys good to see people are out there that appricate this car.

I will answer people interested by e-mail if you are interested give me your
e-mail or phone # and i promise i will reply with in 24 hrs.
 

darcysheppard

Member
Established Member
Joined
Nov 7, 2010
Messages
103
Location
ontario
price has not been given. if you are interested you have to contact me. give me your e-mail or # and i will be intouch with in 24 hrs.
 

NateCO84

New Member
Established Member
Joined
Feb 22, 2010
Messages
16
Location
USA
Weird...I was just thinking about this car two days ago. I wish I had the funds to buy!

GLWS, free bump for ya!
 

darcysheppard

Member
Established Member
Joined
Nov 7, 2010
Messages
103
Location
ontario
Start saving

here is the short list of up grads:

MOTOR, DRIVE TRAIN & EXHAUST
Keith craft 331 stocker (all forged internals)
Edelbrock alum heads
crane 1.72 roller rockers
stock upper and lower intakes
full fuel system (rails, pressure gauge,lines,Forced induction pump, etc only the best was used here)
automatic fuel shut off value (this is in case gas line comes of or is severed)
vortech S trim SC (super quiet) 2.75" pulley 12 lbs
Anderson power pipe for extra 2 lbs of boost
ford balance 42 lbs injectors
large 7 quart oil pan
HD oil pump
3 core rad
SCT tuner with 10 settings in glove box (mild to wild 91 to 94 octane setting, 6k rpm shut down, 5k rpm shut down etc, etc.)
msd 6AL Electrical boost
40mm taylor wire
powder coated 200 amp alt
all upgraded internal dist and ing boost, etc
custom built Viper spec t-56 6 speed tranny with 26 spine output shaft
pro 5.0 short throw shifter
center force clutch and custom flywheel with 26 output shaft
alum drive shaft with hardened universal joints
rear alum diff plate adjustable (made by SVO) can’t even by these any more
Full length 1-5/8 headers, 2.5" h-pipe, 2.5" flow masters

Suspension:

Sub frame connectors welded before under side was painted.
Koni dual adjustable shocks
eibach lower springs (pro kit)
eibach front and rear sway bar
every bushing switched to polyurethane
maxximum motorsports solid steering shaft
maxximum motor sports caster camber plates
maxximum motorsports adjustable lower control arms
NOS upper control arms for ride comfort
Alum Steering rack bushings
Bear slotted and cross drilled rotors, all new lines
rims widened to 9" to all for 255/40/rubber

INTERIOR:
this area I wanted to stay stock so only used three gauges, but built in hidden shift light and oil pressure gauge.

EXTERIOR:
This is also an area I wanted to stay stock so I left it alone. car is original paint. I can send you all tags if you want to see pictures.

*****ALL STOCK PARTS I STILL HAVE IN BOXES. I SAVED EVERYTHING, EVERY NUT AND BOLT IF I EVER WANTED TO PUT BACK STOCK*****

Also every part of this car was powder coated car is so easy to clean.

I can go into way more detail if you are serious, I have a binder 3" thick with the entire build from start to finish, including like 300 plus pictures.
 
Last edited:

NateCO84

New Member
Established Member
Joined
Feb 22, 2010
Messages
16
Location
USA
Ok, wait a min. I got so excited when I saw the MystiChrome Cobra I didn't even read anything else.

My last comment was referring to that, but GORGEOUS car and (again), GLWS!
 

8secCobra

New Member
Established Member
Joined
Jun 12, 2005
Messages
38
Location
Normal Illinois
Am I missing something here? Or typically when you have a car or anything else for sale...you POST A PRICE...and negotiate a little from there...Please enlighten me.....the car is nice, and will pull a premium but I am not following your logic. :pop:
 

Users who are viewing this thread



Top