1987 Mustang roadrace/autocross

oregon87

Active Member
Established Member
Joined
Aug 25, 2014
Messages
197
Location
Bend, OR
I've had this car for sale numerous times and each time I had a difficult time letting go and I decided to keep it. Now it needs to go. I'm pursuing my pilot's license and no longer have time for a track toy. Priced to sell fast!

Engine:
Stock block 347 built by AD Performance
Mahle flat top pistons (10.7:1)
Comp XE282HR cam/Comp roller rockers
World Senior 58cc aluminum heads (2.02/1.60)
BBK shorty headers, offroad H-pipe, Flomaster 3 chamber mufflers. Will pass any db test.
Edelbrock RPM II intake manifold
Accufab throttle body
FMS 36lb. injectors
Canton road race oil pan, pick up and high volume pump
Megasquirt 2 stand alone engine management w/ wide band O2
Misc front engine bracketry to remove A/C, smog pump, etc
Brand new Spec stage 3 clutch, pressure plate, TO bearing
Lightweight Fidanza flywheel
MAC cold air kit
MSD 6AL box & coil
Remote oil filter with cooler
Power steering cooler
Summit aluminum radiator

Transmission:
Standard WC T5
Steel front bearing retainer
Rear cluster support plate
Road race 5th gear set
MGW shifter

Rear end
Torsen T2R with 31 spline Moser axles
3.73 gears

TA Performance aluminum girdle

Front suspension:
MM sway bar, relocation bracket and support
MM K-member
MM front offset, SN95 control arms
MM coilovers with Koni SA & Hypercoil springs
MM camber/caster plates
MM strut tower brace
MM thru bolt bump steer kit
Wilwood 6 piston brakes, 14" rotors
MM full length weld in subframe connectors
18" Saleen 5 star wheels with Hoosier 275s
Adjustable brake bias control

Rear suspension:
MM panhard bar
MM torque arm
MM coil overs wth Koni SA & Hypercoil springs
MM adjustable sway bar
MM lower control arms
MM rear shock mounts
Cobra 11" brakes
18" Saleen 5 star wheels with Hoosier 275s


Interior:
2 Momo Start seats
6 point harnesses
Battery relocated behind passenger seat
12 point rollcage with additional bracing and door bars(painted cage and interior)
Autometer gauges
Window net
Upgraded pedals
Quick release steering wheel
Gutted doors
Custom switch panel (still needs to be wired)

Exterior:
4 year old paint
H.O. Fibertrends cowl fiberglass hood w/ carbon fiber hood vent clear coated for UV protection
Weinerdog fiberglass front end w/ splitter
ABS plastic side skirts (mimic the ones from Agent 47)
Custom adjustable rear spoiler

Lexan rear window

At the last track day at Thunderhill on 7/12/2015, the engine began experiencing low oil pressure. I have not had the time to fully diagnose. It could be a pressure relief valve in the oil pump and it may be a cracked block. I have priced the car based on the worse case scenario.

The car is located in Bend, OR. I may be willing to travel a reasonable distance to meet a buyer. Please feel free to contact me with any questions. I'm looking for $11K including a nice 20' CargoMate enclosed trailer. $7k for the car alone. Call or text Dave @ 541-815-4587. I have numerous pics if you are interested.
 

Attachments

  • 20150718_112612_resized.jpg
    20150718_112612_resized.jpg
    1.4 MB · Views: 1,906

Users who are viewing this thread



Top