14 GT500 front Brembo takeoff

[Thabeast]

Calipers, brake lines, dust shields, rotors, and 2 sets of pads. 5600 miles when removed. Factory pads have ~ 2000 miles on them, seconds set is Porterfield from Revan Racing 3600 miles on porterfields.

ALL SOLD

Couple of minor scuffs on driver side caliper shown below

 

[Thabeast]

fronts sold pending funds
rear still available

 

[Smokinstang65]

Are the rears stock GT size brakes or are they an upgrade?

 

[2009MustangGT500KR]

Interested in rears, can you pm phone number? Thx

 

[Thabeast]

Are the rears stock GT size brakes or are they an upgrade?

13-14 rear GT500 are different part numbers than 13-14 GT brakes, not sure what the difference is though

 

[Thabeast]

Interested in rears, can you pm phone number? Thx

pm'd you my number, sorry I missed your post

 

[Coz]

13-14 GT500 had 13.8" diameter rotors vs 11.8" rotors on the V6 and GT Mustangs. Axle brackets are also different to allow mounting of the calipers further out to account for the larger rotors. The calipers and pads are identical but you either need the new axle brackets (requires pulling axle)

DR3Z-2C100-A Adapter, RIGHT $64.26
DR3Z-2C101-A Adapter, LEFT $64.26

or you can get spacers from "ncmustangparts" on eBay.

https://www.ebay.com/itm/05-14-Must...ash=item25ecafdebb:g:jgQAAOSwF1dUTPnF&vxp=mtr

I originally used the spacer brackets but when I installed new Moser axles I took the opportunity to install the GT500 axle brackets.

I can sell my used set (about 5000 miles on them) for $60 plus shipping if anyone is interested.

 

[Thabeast]

still have 13.8" rears with bracket, calipers, pads $200

SOLD