10.5 rim

[04RiceEater]

Did any have a problem putting the 10.5 chrome replica 03 cobra rim on their cobra with the 315 nitto? Thanks guys, dont want to order it if its not going to fit.

 

[SteelersVenom06]

No issues here. Just shaved the rear IRS bolt down a bit to play to safe.

 

[Senkak]

What backspacing is required?

 

[Top_Fuel]

315 Nittos on 10.5" wheels will fit on a Terminator without the use of wheel spacers. The reason these will work OK while other 315s won't is because Nitto tires tend to be more narrow than their listed size. For example, a 315 Nitto is only about as wide as a 295 Goodyear of BFG tire.

For a better understanding of the issues involved with 10.5" replica wheels and 315 tires, check out this thread...

http://www.svtperformance.com/forums/showpost.php?p=4458244

 

[SNAKE CHARM]

315 Nittos on 10.5" wheels will fit on a Terminator without the use of wheel spacers. The reason these will work OK while other 315s won't is because Nitto tires tend to be more narrow than their listed size. For example, a 315 Nitto is only about as wide as a 295 Goodyear of BFG tire.

For a better understanding of the issues involved with 10.5" replica wheels and 315 tires, check out this thread...

http://www.svtperformance.com/forums/showpost.php?p=4458244

Great write up!!

 

[GodStang]

running MT etstreets on this set up which I think are wider and I used only a 3/8" spacer and works great. No bolt shave.

 

[Senkak]

I run the 315 Nitto's on the stock 9" rim.
No spacer is required.