1/4" hubcentric spacers?

[K-Dubb]

I am ordering some 17x10.5 wheels, and want to get some spacers that aren't too big for the studs. How do these look? Will I be able to use the stock lugs?

Maximum Motorsports 1/4" Thick Hubcentric 5-Lug Wheel Spacers for 94-04 Mustang

Also, does anyone have any pics of 17x10.5s and 1/4" spacers?

 

[BIGV]

I wouldn't use those unless you get longer wheel studs lethal sells a set of 3/8 with et lug nuts. That is what I have on a 10 in wheel with 315's and I have no problems.

 

[K-Dubb]

I wouldn't use those unless you get longer wheel studs lethal sells a set of 3/8 with et lug nuts. That is what I have on a 10 in wheel with 315's and I have no problems.

You wouldn't use spacers in general, or the ones I am quoting? They are smaller than 3/8" and I have read not so good things about the et lug nuts.

 

[fiveoh2go]

I am ordering some 17x10.5 wheels, and want to get some spacers that aren't too big for the studs. How do these look? Will I be able to use the stock lugs?

Maximum Motorsports 1/4" Thick Hubcentric 5-Lug Wheel Spacers for 94-04 Mustang

Also, does anyone have any pics of 17x10.5s and 1/4" spacers?

The spacers pictured in the link you posted look to not be hubcentric. Make sure you know what you are buying.

 

[K-Dubb]

The spacers pictured in the link you posted look to not be hubcentric. Make sure you know what you are buying.

I suppose they aren't. Thanks. Do they make 1/4" hubcentric spacers?

 

[K-Dubb]

I found this place that can custom make them. However they are listing what looks to be hubcentric as "Wheel-Centric".
WheelAdapter.com > Wheel Spacers

 

[K-Dubb]

bump! 1/4" hubcentric spacers and stock lugs from wheel adapter.com or 3/8" LFP with ET Lugs...which one would be safer?

 

[fiveoh2go]

bump! 1/4" hubcentric spacers and stock lugs from wheel adapter.com or 3/8" LFP with ET Lugs...which one would be safer?

Neither.



Lethal 3/8" hubcentric spacers with ARP 3" studs and open-end lug nuts.