09 Authentic Saleen Gurney/H302 Crome wheels 19"x10" fits 05+ Mustangs (NEW)

Supercharger

Member
Established Member
Joined
Jun 20, 2008
Messages
53
Location
Iowa
Can you/anyone confirm if these actually fit the GT500?!

I have Saleen the Parnelli Jones wheels, which I believe have the same specs as these. Two dealers told me they would fit over the GT500 front brakes with no problem, but it turned out that they barely grazed the brakes and I needed 1/8 inch spacers. Still, I love the wheels and would have purchased them anyway, even if I had known in advance about the spacers.
 

*TK*

COBRO
Established Member
Joined
Nov 5, 2006
Messages
1,782
Location
USA
Member that bought a set from me

I got one of the sets off of TK early this year. He is a VERY standup guy and i would highly recommend these rims to anyone with a S197. Here are some pics of my car. The center caps are just the standard 20" saleens centers Part Number:06-1401-C11898A very easy and cheap to get. I also added the Saleen big brake kit to my car as well.


6884230143_large.jpg


6884230148_large.jpg


6884230146_large.jpg


6884230145_large.jpg


6884230144_large.jpg

SVTP member
 

*TK*

COBRO
Established Member
Joined
Nov 5, 2006
Messages
1,782
Location
USA
Another PM from a satisfied member

Mach1ne said:
TK,

Drove to PA to see ya in July. It took awhile, but I finally got the wheels some rubber. Hope they come out ok. Thanks again!






 

Boston Mike

New Member
Established Member
Joined
Mar 3, 2009
Messages
252
Location
Plano, TX
Your right they are a half inch wider than stock :beer:

I think what the person you were responding to was saying was that the GT500 stock fronts are 9.5"...........your set is only 9" up front, so actually a half inch LESS. :shrug:
 

RKT SHP

New Member
Established Member
Joined
Oct 30, 2009
Messages
110
Location
Miami
Would you be willing to sell 4 of the 19 x10's as a set......or are you only willing to do the 19 x9 front with the 19 x 10's in the rear
 

*TK*

COBRO
Established Member
Joined
Nov 5, 2006
Messages
1,782
Location
USA
I think what the person you were responding to was saying was that the GT500 stock fronts are 9.5"...........your set is only 9" up front, so actually a half inch LESS. :shrug:

I got ya, but if you take the average of all four, it is exactly the same… :poke:

Would you be willing to sell 4 of the 19 x10's as a set......or are you only willing to do the 19 x9 front with the 19 x 10's in the rear

Sorry, I am not willing to separate. Yes the front rims are 9" wide and the rears are 10".

shipping to 06484???

Shipping to this zip is $80.00, so it would be $455.00 shipped
 
Last edited:

*TK*

COBRO
Established Member
Joined
Nov 5, 2006
Messages
1,782
Location
USA
You may have a hard time here since these are 1/2 inch more narrow than our stock Front 9.5 inch rims.. Try the regular S197 forum?

Not in width, anyway. The GT500 wheel is 9-1/2" wide. Diameter, yes.

Buy Ford Racing Parts!

I think what the person you were responding to was saying was that the GT500 stock fronts are 9.5"...........your set is only 9" up front, so actually a half inch LESS. :shrug:

Yes you guys are correct, GT500 wheels are 9.5 all around. BUT at the same time you would be loosing 1/2 inch in the front you would be GAINING a 1/2 inch in the rear...

I think that for the most part, if someone owns a mustang and is into modding it, they are most likely trying to go fast in a straight line (look at all the guys that opt for a straight axle on their 03/04 Cobra's). Then, if that is the case I know I would be willing to give up a half inch in the front and gain a half inch in the rear to get the power to the ground. Unless you are strictly road-racing the half inch less in the front is not really going to matter at all.
 
Last edited:

Users who are viewing this thread



Top