THAT'S some might quick shifting. And the blower scream, well, screams Terminator!
THAT'S some might quick shifting. And the blower scream, well, screams Terminator!
THAT'S some might quick shifting. And the blower scream, well, screams Terminator!
View attachment 1673161
Man thise shifts are quick ... and she SCREAMS I'd love to lock it up with you sometime, I think we'd have some fun ...
My T45 on my 100xxx mile 99GT with Centerforce dual friction clutch is way smother shifting than my T56 with 40xxx miles, Twin disc RXT, McLeod adjustable pivot ball, anti venom mod, 26 spline, and every miracle fluid, RP, Amsoil, DexIII, etc...I didn't think the T56 seemed any notchier than a T45.
Any update? Did you replace the TOB, pilot bearing and pivot ball? And did that resolve your issue?Well guys my trans started making a noise. Seems to be the tob. Noticed that when i un hooked the cable from the clutch fork the fork hits the bell housing and the tob always has a small amount of pressure on the fingers. So im guessing i need to get an adjustable pivot ball. Also i jacked up my rear end and my tires would spin alittle when i put it in 1st gear with the clutch disengaged. Im guessing since everything was not adjusted correctly by the previous owner, maybe caused premature wear on the diaphram fingers causing it to not disengage fully. I will be replacing the tob,pilot bearing and pivot ball and see if that fixes my issue of high rpm shifting notchiness.
Sent from my SM-G973U1 using the svtperformance.com mobile app