03/04 Boost hose

[codycat91]

Where do I thread the boost hose for my 03/04 cluster? And do I need to cut a hole in the firewall or anything? For those of you that haven't been following, I'm doing a termi swap in my GT (plus a lot, but basically that).

 

[2001Snake]

I don't understand your term "thread" but all you have to do is run the vac hose to the cluster and tie the hose into the intake where it will see boost and vacuum.

 

[codycat91]

By thread, I mean does it go through the firewall, or do I have to fish it down the side, etc

 

[03zincyellowsvt]

By thread, I mean does it go through the firewall, or do I have to fish it down the side, etc

i think it goes through the passenger side, and then goes across to the gauge.

 

[10thSVT_03]

Stock on 03/04 Cobras it comes in the car behind the glove box and goes across to the cluster.

 

[fast ford brian]

You can drill a hole anywhere you want and route it to the intake.

 

[codycat91]

Alright thanks. And do you know what size tube it is? And can I just get it at any parts store?


Sent from my iPhone using Tapatalk

 

[Silver03Termi]

You can drill a hole anywhere you want and route it to the intake.

lower intake.
here are some good pix of the vacuum system. The eaton works the same way.
http://www.svtperformance.com/forums/how-230/562225-complete-egr-delete-how.html

 

[prostkr]

The stock line is hard nylon 1/8" I believe. The tubing for a mechanical oil pressure gauge would be the closest thing I can think of to match it.