Hello, I just installed these and attempted to tune the A/F a idle. The car runs extremely rich at idle (10.8-11-4) and after a couple of minutes the idle wanders and the car dies.
However, before the 42#'s were installed the car idled fine with the 24#'s. Thinking that perhaps I may have gotten some injectors that had been modified for more flow I input the 60lb data into the software. The car idled fine, albeit remarkably lean.
I am aware that you shouldn't input data from one injector manufacturer to the other, however I seem to be coming up short in regards to data on these injectors.
Does anyone have any information, or perhaps some insight?
I'm thinking about installing the 24#'s, and dialing in the MAF for idle and unloaded rpms and then installing the 42# injectors and scaling them.
However, before the 42#'s were installed the car idled fine with the 24#'s. Thinking that perhaps I may have gotten some injectors that had been modified for more flow I input the 60lb data into the software. The car idled fine, albeit remarkably lean.
I am aware that you shouldn't input data from one injector manufacturer to the other, however I seem to be coming up short in regards to data on these injectors.
Does anyone have any information, or perhaps some insight?
I'm thinking about installing the 24#'s, and dialing in the MAF for idle and unloaded rpms and then installing the 42# injectors and scaling them.