tps

  1. Tbrake1978

    1993 Mustang Cobra TPS Issue

    Hi Everyone. I have a surging idle issue. Here is what I have done so far. All vacuum lines are leak free TPS is reading 4.95V (Tested with Green wire and Black KOEO) I have ohmed the wire (Black wire to Negative Battery post) .3 was the reading. I loosened the 2 screws and no voltage...
  2. aarons04cobra

    whipple 2.9 chrusher throttle position sensor reading 18% @ idle

    Anyone had this issue before? I have a previous thread referenced below but it is never stated what the final TPS reading was. Any help is appreciated. Reference thread: https://www.svtperformance.com/forums/threads/throttle-position-sensor-reads-19-at-idle-whats-going-on.349900/
  3. 1

    setting wot falling voltage

    Ok guys I've got my nos window switch/wot wired up for nitrous tapped into the brown wire of the tps . I used a voltmeter and found closed throttle was 4.2 and wide open was .07 . So I set the tps on window switch.07 to activate solinoids .tested with key on engine off . It works when I open...
  4. Gbone

    00' and 02' GT Harnesses

    I have just about every electrical component and wire harness there is for an 02' GT as well as the TPS Harness off of an 00' GT. Prices are all easy, make offers and tell me what ya need. Call/Text, 918-859-6565.

Top