ported

I have acquired this blower and am giving up on buying an 03 Cobra but am trying to figure out how to tell if it's a Steggy or Posi port etc. It has a number on the front, but does not say Stiegmeier like some of the ones I have seen.

Looking to make more N/A power or more of the top end of your boosted application?? 1320 Junkie Performance Ported intake manifolds can help with that! Starting NOW only thorough November 11th, $50 OFF any of the ported manifolds! SHOP NOW Lethal Performance | 1320 Junkie Performance

Looking to make more N/A power or more of the top end of your boosted application?? 1320 Junkie Performance Ported intake manifolds can help with that! Starting NOW only thorough November 11th, $50 OFF any of the ported manifolds! SHOP NOW Lethal Performance | 1320 Junkie Performance

Looking to make more N/A power or more of the top end of your boosted application?? 1320 Junkie Performance Ported intake manifolds can help with that! Starting NOW only thorough November 11th, $50 OFF any of the ported manifolds! SHOP NOW Lethal Performance | 1320 Junkie Performance

Looking to make more N/A power or more of the top end of your boosted application?? 1320 Junkie Performance Ported intake manifolds can help with that! Starting NOW only thorough November 11th, $50 OFF any of the ported manifolds! SHOP NOW Lethal Performance | 1320 Junkie Performance

Ford Performance has just released their re-designed CJ Manifold for the 2011+ Mustang GT's! Made from lightweight composite material, Improved lid stiffness, Tuned Runners, and tested to 20+ PSI, this is the Ultimate CJ Manifold, whether your All Out N/A or Big Boost! Available in Standard as...

Today, our guy Joe goes over two manifolds, one 2020 Mustang GT Manifold ported by 1320Junkie and another, just a stock 2021 F150 Manifold. While both started out life with near identical ports, you'll see how big of a difference a ported intake manifold will make for your 5.0. Key Points -...

Today, our guy Joe goes over two manifolds, one 2020 Mustang GT Manifold ported by 1320Junkie and another, just a stock 2021 F150 Manifold. While both started out life with near identical ports, you'll see how big of a difference a ported intake manifold will make for your 5.0. Key Points -...

Didn't you say you wanted more N/A power? Yes? Well, you're in luck! We are continuing our Black Friday sales with all 1320Junkie Ported Manifolds on sale for $50 off! Here, at Lethal Performance! Head on over to the site to get your order in! Offer ends 11/12. Check them out here -->...

Stock Intake not doing it for you lately? Feeling limited? Well do we have the answer for you... 1320Junkie just dropped their PORTED COBRA JET Intake Manifold. This is the answer to intake all your solutions. If you have any questions on concerns reach out to us at 561-753-8105!

Stock Intake not doing it for you lately? Feeling limited? Well do we have the answer for you... 1320Junkie just dropped their PORTED COBRA JET Intake Manifold. This is the answer to intake all your solutions. If you have any questions on concerns reach out to us at 561-753-8105!

Stock Intake not doing it for you lately? Feeling limited? Well do we have the answer for you... 1320Junkie just dropped their PORTED COBRA JET Intake Manifold. This is the answer to intake all your solutions. If you have any questions on concerns reach out to us at 561-753-8105!

Hi all, I am a bit torn here and haven't found good information on this exact topic yet. I've got a 2010 GT500 with a Stiegemeier ported M122 with a 2.2" pulley, JLT 123 intake, BBK 65 MM throttle body, and VMP inlet elbow. I plan on adding the 13/14 56# injectors and VMP fuel pump boosters...

Hello Everyone, I recently had the opportunity to pick up a 2003 DSG Vert Cobra, love the car! I'm in Canada and unfortunately the driving season is pretty much over. I figured I would take the next few months, by few I mean 6 months at least lol, to do some research on what mods should be...

Anyone know where I can locate someone who ports the intakes on the 96-98 cobras, or has one for sell? I plan on matching the manifold with ported heads in the future as well. Any advice? FBO 96 cobra, no tune yet.

I have tuned my car with SCT Pro racer, and just converted my car to E85. I have full bolt-ons and a ported Eaton with 2.8 upper and 4 lower pulley, making abount 17 psi. I am woundering how the timing chart should look like, right now I am running the timing chart from SCT on race gas tune...

Magnaflow exhaust, hand polished, $250.00 (sold) Ported Eaton, bought ported, not Stegmeier, 2.76 pulley, works great $650.00 Polished ACCUFAB TB & plenum, $350.00 (Sold) JLT cold air intake, dark shadow grey painted tube $200.00 Tinted tails,all sockets included $100.00 (Sold) Pro 5.0 shifter...

Sold. Please delete.

selling me mirror polished Stegmeier stage 7 ported eaton. Also looking to sell 58lb steggy injectors, mirror polished dragon plenum, Mods are 2.4 pulley Venom cooler Stage7 port Mirror polish Car made 517 on 58lb steggy injectors with sct preloaded tuning. Looking to get 1500 plus...

I bought this from a member on SVTP, and never used it. I have since decided to go with a Whipple 2.3, and need to sell for money to fund the swap. Inlet was not ported by Posi, but it is a pretty good match and looks like a quality port. More than willing to ship to the lower 48 states for...

I've decided to sell my cobra, so the supercharger will have to go. I'm not exactly sure on the mileage of the supercharger, but it has 15k on it since the port from Stiegemeier. I bought this from someone on here 2 or 3 months ago who had just returned his car back to stock. The is one off...

Hey guys I'm finally going to pulley my 03 cobra. My question is since I have to get retuned anyway should I just spend a bit more and find a ported eaton? I have a bap, mafia, and idler pulleys already purchased. Would I need anything else if I went to a ported eaton? Injectors? Let me know...

Changing directions: selling my ported Eaton and mods as a package. Zero miles since porting. Ported Eaton - cleaned/greased needle bearings, new GM SC oil, inspected coupler Welded & Ported, matched oem plenum Ported oem TB BF black 2.76 pulley LFP 90mm pulley with bracket (new) MAFia F7373...

MP Blower ported by JokerL on LR. wrinkle black with a 2.7 pulley I Never installed it just purchased a 2.3 Whipple don't need this anymore. It was ported and rebuilt. Asking 1200 shipped. OBO

For Sale: One Pair of Brand New, Stage II, 5-Axis CNC-Ported, 9-Thread Spark Plug, Left & Right "DC" Castings, 310 CFM, Fully Assembled, 4V Cobra Cylinder Heads. No Cores Required! $4000 shipped. I also have a Brand New Lower Intake $500, a Brand New Timing Cover $300, an upper Idler Bracket...