nitrous

Come check out our 4th of July Sale at Team Beefcake Racing. Some of our top brands are running 10%,15%, and 20% off now and in the coming days! PMAS, Pypes, Corsa, Fore, McLeod, AWE, Lund, Nitrous Outlet, and more! Follow the link below to see these great sales. If you have any questions give...

Close...

I have a 1988 mustang gt with a sbe 302. b303 cam,gt40 heads, victor jr intake, 650 demon carb, 1 5/8 headers, nos cheater plate with 125 jets, c4 with 4200 stall and 3.55 gears. weighs about 3300 with me in it. wondering what everyones et guesses were before I finished it up and took it tp the...

Hey, I have a 99 Cobra with an E85 tune and 98 Cobra cams. I plan on throwing a 100 shot on it, and was wondering if throwing bigger cams on it would be too much or just not very efficient, and what amount of power I could get from it. Thanks!

Good evening folks. Please take 2 minutes to read through this, thank-you.I have been planning nitrous for 4 years. I have obtained all the accessories, purge kit, bottle opener, bottle heater, window switch, fuel shut off and possibly a wideband. It's a Zex set up, 75 shot. My Goal- A...

I bought a nitrous kit from a fellow mustang club dude, and was wondering if you fine gentleman could possibly let me know if it looks to be in working order, and I have all the parts I need. Photos to come as soon as I can figure out how to post them. Supposed to be a NX Coyote H.O. Plate kit.

i have a 1999 Ford Taurus SE that ive been working on It has a 3.0L DOHC Duratec v6 that i wanna run NOS as well as turbocharge it with a Garrett GT5541R i know It has an aluminum engine block and aluminum DOHC cylinder heads. The cylinders are lined with cast iron but i definitely wanna push...

what should I expect out of a 125 shot, long tube headers, and 3.73 gears. Thinking about adding a kit and was wondering what everyone else is getting out of them. Just curious to see if anyone had a similar setup and what they made on the dyno.

Has anyone done a resonator delete on their over axle pipes? I was wondering if having the resonators in there would hurt the exhaust flow too much or whether it would effect the flow at all. I know the sections where the resonators are located are narrowed down and I was looking to delete them...

My tuner doesn't like to tune wet nitrous through a blower. I have a 2004 Cobra, 5.0 stroker, 9 : 7 to 1 compression, Diamond pistons, fully studded , Whipple 2.3 at 23 lbs and e85. I'm wanting to run a progressive shot - maybe up to a 200 shot. He wants me to run a dry setup instead of...

I'm looking into a nitrous setup for my 13 coyote. I was leaning towards adding a nitrous express plate kit. I'll be running longtubes with axle back, E85 and CAI on stock manifold when I do the kit so I was wondering if any of you nitrous guys had any advice for a safe setup.

What plugs would you suggest for my combo? 5.0 stroker, 9:7 to 1 compression, whipple 2.3 @23 lbs, adjustable wet nitrous 75 - 200 shot ( depending on the mood, lol!). Also, what antifreeze is everyone running? Suggestions are appreciated!

Just like the title says, Let me know what y'all have.

Nitrous guys I've decided to spray my 2004 mach this winter :pepper: and I went with the Nitrous Outlet plate kit. This is the setup in the engine bay currently: I set it up this way so the solenoids would be hidden by the shaker and went with the plate because its a clean look and I've...

My car currently has a Vortech JT Trim, built motor, and is about to be switched to e85. I have a Nitrous Outlet Plate system laying around and I cant find anyone running a vortech with some nitrous. Was wondering if there were any similar cars out there, anyone with experience with the two, or...

4.6 mustang mishimoto aluminum radiator-sold Ford Racing Fr500 Cam in great shape- $575 obo 03/04 cobra parts New 03/04 cobra strut tower brace for eaton supercharger made by steeda- $50 03/04 cobra cold air intake filter and heat shield- $40 Metco lower with...

96 mystic cobra 146,000 miles real mystic cobra #564 out of 2000 signed by carroll shelby Pros -full wet nitrous kit 75 shot dyno tuned with wot box and purge kit (mainly for show) -10lb nitrous bottle (empty) -410 gears -Eibach lowering pro-kit -big brake kit drilled and slottet rotors -REAL...

Any one have any experience with this, I recently purchased a 2015 hyundai genesis sadan 5.0 ...there isnt any aftermarket support for this car and would like to make it faster ...the info I have is the fuel system is under the intake mainfold, and about 2100 psi what r some opions for tapping...

I recently bought a 2015 genesis sedan 5.0 ultimate.... Aftermarket support is not out there, I have a wet nitrous kit I wanted to add.. I'm lost with the gdi system... 2100psi fuel system injection system is under the intake manifold... I don't want to take it off where else can I tap fuel...

Nitrous Express Plate kit $450 + Shipping Jetting from 50-200hp Fuel line adapter NOS Physical WOT switch As well as the NX WOT switch. Everything needed to hook it up and run it included. Only ran one bottle through it , really need a shifter so it's gotta be sold. Pm or text me...

F/S: Blue anodized 10lb NOS bottle, its empty. Comes with NOS line fitting. $100 obo plus shipping if your not willing to pick up. Bottle alone costs $230 from Summit, fitting is another $20.

Looking for a Nano 3000psi universal kit....

Hey guys, its my first time posting but i come to the forums often by means of search. I'm thinking of doing a nitrous set up as I've just graduated high school in may and I'm too poor to afford a blower or turbo. Looking to run a Zex wet kit running either 100 or 125 shot. Have not decided...

I have a brand new NX plate kit for a 11-14 5.0 for sale. Its never been opened, I just decided to go another way. Im looking to get $600 plus shipping. if using Paypal please add fee or send as gift. Same kit shown here at AM http://www.americanmuscle.com/nitrou...ekit-1112.html Kit retails...

for sale: Holley NOS plate kit with 2 10 lb bottles, all the lines needed to hook it up, 3 sets of jets, automatic bottle heater, purge, and n2mb wot box window switch. Asking $600 shipped to you