install

Tighten Your Belt Maintain big boost without belt slip thanks to VMP’s billet GT500 tensioner By Steve Turner Owners of 2007-2014 Shelby GT500s know how easy it is to build power with these cars. Just add a smaller blower pulley, open up the inlet, add a custom calibration and the gains are...

The installation and assembly of our Competition Plus Shifter for the 2015-2016 Ford Mustang is a fairly involved process. Here is how it's done. https://www.youtube.com/watch?v=E0VcualESYY https://www.youtube.com/watch?v=dWQDiYXz2L8 For additional information, contact our tech line at...

Heavy Duty Installing McLeod’s RXT1200 clutch in an 800-plus-horsepower GT500 By Steve Turner Photos courtesy of VMP Performance The Shelby GT500 presents a daunting challenge for a clutch. These are heavy cars that produce tons of torque. When you bolt on a set of sticky tires, raise the rpm...

Fresh Air Installing Steeda’s cold air intake wakes up the EcoBoost Mustang By Steve Turner Photos by Steve Turner and courtesy of Steeda Autosports Since there were internal combustion engines, there have been hot rodders trying to increase their output. Over the years, engines have...

Super Sleeper VMP Performance boosts and tunes a new Ford F-150 with great results By Steve Turner Photos by Steve Turner and courtesy of VMP Performance During the NMRA season opener in Bradenton, Florida, the event announcers were blown away as VMP Performance’s Brad Marsh piloted the...

Little Fighter ProCharger turns the latest six-cylinder Mustang into a real performer By Steve Turner Photos by Erik Radzins/ProCharger We live in wonderful times. The Ford world is brimming with performance options from the sharp Fiesta ST to the superstar Ford GT. In the world of...

Hello guys, so ill try to keep this brief. This is how to install Kook Long Tubes on any 4v cobra engine (99-04, also for Teksid) Ill start by saying, this guide is specifically for Kooks LTs, 1 3/4 x 1 7/8 x 3 (However will work the same on any 1 3/4 style non-stepped or smaller), and will...

Planning on upgrading your vehicle's exhaust system? Not sure where to purchase or have your Flowmaster exhaust products installed? We can help! Visit our website, www.FlowmasterMufflers.com and click on the dealer locator button in the top right-hand side of the screen. Once clicked, a...

Just ordered 1-3/4" Kooks longtubes w/ the catted x pipe recently :). I'm researching what it is going to take for the install on these. I have been reading that people are noticing play in the steering wheel after unbolting and re-bolting the steering shaft? What is causing this and how can I...

So, as technology advances so does my needs. In fact ive been told that i have confused my needs and wants. And in fact i do have a 2014 GT, So i could agree. So here is my dilemma, i want to install a tablet in my 2014 gt. I have a few questions for those who have sucessfuly done this. Ive...

I just got done putting cams in may car and just put the crank pulley on now its hard to turn and metal shavings from the timing cover are coming off and a ticking sound. the engine turned fine before i istalled the pulley. The ticking sound sounds like its coming from the crank pully i don't...

Well the time has come, grab your favorite snack and beverage of choice. Here it is the largest install video to date brought to you by Bill Tumas and CJ Pony Parts. If you haven't realized by now we are your one stop shop for all things 2015 and well I'm going to toot our own horn here and...

http://www.youtube.com/watch?v=HWAuSIwn1HY 3dCarbon 692108 Mustang Ground Effects Carbon Fiber 4-Pc 2015 This is 3dCarbon's 4 piece carbon fiber ground effects kit fitting all 2015 Mustangs with the GT Performance Package and the 1,964 Limited Edition 50th Anniversary GTs. Carbon fiber has...

http://www.youtube.com/watch?v=ZeR_33r7U9U Roush 421834 Mustang Axle-Back Exhaust Stainless Steel GT 2015 Today we are installing Roush's stainless steel axle-back exhaust on our 2015 Mustang GT. The 2015 stock exhaust sounds good from the factory, but when you want it to sound great, a...

http://www.youtube.com/watch?v=tT1xH29xz3I Mustang License Plate Bracket STO N SHO 2015 | CJ Pony Parts Today we are showing you how to install the Sto N Sho License plate bracket on our 2015 Mustang EcoBoost. There has been a few questions about the Sto N Sho on the 2015's that are...

http://www.youtube.com/watch?v=e9PRtb7l7xA Air Lift Performance 95723 Mustang Digital Air Kit 2005-2014 Today we have Jeremy from Air Lift Performance to help us install their complete digital air suspension kit on a 2013 GT500. This kit will fit all 05-14 Mustangs. Air Lift's kit allows...

http://www.youtube.com/watch?v=2UWSy-urKo4 MRT 98U901 Mustang High-Flow Turbo-Back Exhaust EcoBoost 2015 Today we are showing you how to install MRT's stainless steel 3" to 2-1/2" high-flow catted turbo-back exhaust system with 4" tips on our 2015 EcoBoost Mustang. The Mustang EcoBoost is...

http://www.youtube.com/watch?v=vxYNNI_BOXE Eibach EBS28 4.14535 Mustang Spring Sportline Set 2015 In this video we show you how to install a set of Eibach's Sportline spring set on our 2015 Mustang EcoBoost. One issue some people have with the new S550 platform is the stance. One way to...

http://www.youtube.com/watch?v=Rb0k2i_W92E Mustang JLT Oil Separator Passenger Side Kit GT 2011-2015/Boss 302 2012-2013 | CJ Pony Parts In this video we are installing a JLT Oil Separator Kit on our 2015 Mustang GT. This is a tired and true way to help keep oil out of your intake. These...

http://www.youtube.com/watch?v=hydlNCJP3xU Redline Tuning 21-11028-03 Mustang Hood Strut Kit Bolt-In 2015 Today we are showing you how to install Redline Tuning's QuickLIFT Elite hood strut kit on a 2015 Mustang GT. One of the first and easiest modifications most Mustang owners should make...

http://www.youtube.com/watch?v=CwwwQryCUNc Ford Racing M-5200-M8TB Mustang GT Touring Cat-Back System 15 In this video we are showing you how to install the Ford Racing by Borla Touring Cat-Back Exhaust System on a 2015 Mustang GT. We also give you some before and after sound clips with...

http://www.youtube.com/watch?v=3BrvSO3tWew Airaid 452-328 Mustang MXP Series CAI Blue Synthamax GT 2015 Today we show you how to install Airaid's MXP Series cold air intake kit with a blue SynthaMax filter on our 2015 Mustang project car. One sure fire way to get more horsepower is by...

http://www.youtube.com/watch?v=qWPS_LumIhA Airaid 453-326 Mustang MXP CAI Blue Synthamax EcoBoost 2.3L 15 Today we are installing Airaid's MXP Series cold air intake kit with a blue SynthaMax filter on our 2015 EcoBoost Mustang. We have had a lot of success with Airaid's cold air intakes...

http://www.youtube.com/watch?v=BVrUTX68cc0 MagnaFlow 19103 Mustang Competition Series Axle-Back GT 2015 Today we are installing MagnaFlow's Competition Series axle-back exhaust system on our 2015 Mustang GT. As we have said many times, one of the first modification many Mustang owners make...

http://www.youtube.com/watch?v=-gKY848Kcng Eibach 35145.140 Mustang Spring Pro-Kit 2015 | CJ Pony Parts Today we are installing a set of Eibach Pro-Kit springs on a 2015 Mustang GT. The new S550 platform looks pretty good right off the showroom floor, however there is still that annoying...