injector

Our new 2 Minute Tuesday covers a very common topic we get questions about, Injectors. Every fuel needs them to be effective and reliable as well as to make more power. In this video we go over injector options for Coyote owners and what is needed to run e85. Also take a look at the write up...

Our new 2 Minute Tuesday covers a very common topic we get questions about, Injectors. Every fuel needs them to be effective and reliable as well as to make more power. In this video we go over injector options for Coyote owners and what is needed to run e85. Also take a look at the write up...

I am putting together my motor to go back into my car. My setup is a Fore Level 2 system, twin 465 pumps, FIC 1000 injectors (they’re 95lb), comp cams (XE266BH-116 grind), a 2.8 KenneBell Mammoth blower with a 3.5 upper pulley and stock lower (for now) mid length headers, off road X-pipe, etc...

Siemens 60lb injectors $300 shipped 2003 Cobra Factory Fuel Rain with Sensor - $120 Kenne Bell BAP with Rewire Kit + dial switch - $180 2003 Cobra Factory FPDM (not modified) -$70 - Payment Methods - Paypal Friends and family or pay paypal feels Venmo -shipping- Up to the buyer unless...

Pro-M/Granatelli 80mm MAF calibrated for 36# injectors. New filter. Meter was recently flowed by Pro-M. Ford Motorsport 36# injectors, recently cleaned and flowed by WitchHunter Performance. Pro-M elbow and coupler. Less than 200 miles since cleaned/flowed. $400 for all.

Hello, I am looking to purchase a full set of 03-04 Cobra 39# injectors. I would prefer them to be lower mileage and in good overall condition. I am fine with replacing o rings if needed. Let me know what you have, I will likely need them shipped. Thank you

96 Cobra I did a MK VIII swap on. I have everything put back together and I try to start it but it won’t fire up. It will turn over but not fire up. It’s getting spark. I tested the injectors and both of the wires on each injector lit up with my test light. Is that a ground issue? It also had...

I have several items up for sale. Needing to clean out the garage since my turbo build is getting close to complete. All prices are OBO and not include shipping. Items are located in SE Indiana for anyone interested in a local pickup. Cobra oil cooler - 175 Stock '98 fuel rail...

Selling a slightly used set of ID850 Injectors. Used mostly for dyno time, ended up being overkill for my build. These come with the adaptor clips that require no cutting of wires along with the standard wire taps if you choose the more permanent route. I had these on an 01 GT but they will fit...

I purchased these not knowing how much injector i would need at the time. I Installed, Dynoned, Realized I needed an even bigger injector and removed them immediately. No street miles on them at all. Run time approx 5 minutes total. INJECTOR DYNAMICS EV14 HIGH IMPEDANCE ID725 INJECTORS - 68 LB...

FOR SALE: BRAND NEW IN BOX, still sealed in plastic, Injector Dynamics id-1000 injectors, Part # 1000.05.14.60.14.8 Ordered for my 5.0 and never got around to putting them on. Price: $825 shipped SOLD SOLD SOLD SOLD PM or Post in the thread with any questions, and I will gladly...

Brand new set of ID1000's for 11-14 GT. Still in the original packaging. My build changed directions and I will no longer be using these. $875 shipped. Thanks.

have siemsn deka 60lb injectors ev6 style, looking to trade for 80lb injectors ev6 style as well can add cash to trade or i will sell these to buy them new basically brand new, only used for dyno and need to upgrade $300 shipped pm me or txt 8103101290 60 lb/hr Siemens Deka Fuel...

These adapters are for 14mm o-ring size (domestic) injectors and add 1” to the overall length, so they convert a short injector (2” OAL) to a long injector (3” OAL). 8 black anodized extensions, 8 clips, and 16 o-rings, new, $75 shipped. [/URL][/IMG]

These adapters are for 14mm o-ring size (domestic) injectors and add 1” to the overall length, so they convert a short injector (2” OAL) to a long injector (3” OAL). 8 black anodized extensions, 8 clips, and 16 o-rings, new, $75 shipped. [/URL][/IMG]

These adapters are for 14mm o-ring size (domestic) injectors and add 1” to the overall length, so they convert a short injector (2” OAL) to a long injector (3” OAL). 8 black anodized extensions, 8 clips, and 16 o-rings, new, $75 shipped. [/URL][/IMG]

Just got the Tork Tech kit installed, now I have a bunch of factory PI components for sale. Parts taken off an 03 GT 5sp with 116,xxx miles in good working order. MAF is a 6 pin with integrated air temp sensor. One of the throttle cables is brand new. I gave my local Ford dealer the...

was installed on a 99 cobra but never used. Allows you to use low impedance injectors with stock computer. 260 shipped 972 824 9870

Looking for 42# Injectors, for 2001 Cobra. Please reply with details such as; -Miles -Price -Condition (o-rings still in place etc.) -I need a full set of 8 -Picture Thanks:)

Going to turn the car up a little more and the 75lb injectors are near their limit. So, I'm going to buy a pair of the new FRPP 80lb injectors to have some more room to work with. Only reason for selling. These injectors are basically brand new. They have about 1000 miles on them and they are...